Warianty tytułu
Wpływ procesu schnięcia farb przeznaczonych do drukowania offsetowego arkuszowego na bryłę reprodukowanych barw
Języki publikacji
Abstrakty
This report is a presentation on the effect of ink drying process of primary printing inks: cyan, magenta, yellow and black on a volume of solid body of colours, colour coordinates and colour differences in the CIELAB space. The prints were made with the use of IGT C1 printability tester on matte-coated wood-free paper base conforming to the ISO 12647-2 standard [ISO 12647-2]. Experiments were performed with different ink film thicknesses. Special attention was given to nine thicknesses within the range of 0.5-2.9 um. Three different sheet-fed offset process inks were tested: Resista Eco 9500, Inkredible Impression Michael Huber and Aniva Euro Epple Druckfarben AG. Spectro-photometric values of colour coordinates (L*, a*, b*) of the obtained prints allowed to determine the volume of nine solid bodies in the CIELAB space. (original abstract)
W artykule przedstawiono wyniki badań własnych dotyczących wpływu procesu schnięcia farb: niebieskozielonej, purpurowej, żółtej i czarnej na wielkość bryły reprodukowanych barw, współrzędne barwy oraz wartości różnic barw w przestrzeni CIELAB. Wydruki zostały wykonane z użyciem urządzenia do wykonywania wydruków próbnych IGT C1 na podłożu powlekanym matowym bezdrzewnym, wybranym zgodnie z normą ISO 12647-2 [ISO 12647-2]. Badania wykonano dla różnej grubości warstw farb procesowych. Szczególną uwagę poświęcono grubościom z zakresu 0,5-2,9 um. Badaniom poddano trzy rodzaje farb procesowych Resista Eco 9500, Inkredible Impression Michael Huber i Aniva Euro Epple Druckfarben AG pochodzących od różnych producentów. Zmierzone spektrofotometrycznie wartości współrzędnych barwy (L*, a*, b*) uzyskanych wydruków umożliwiły na obliczenie objętości bryły reprodukowanych barw w przestrzeni CIELAB. (abstrakt oryginalny)
Rocznik
Numer
Strony
109--115
Opis fizyczny
Twórcy
autor
- Warsaw University of Technology, Poland
autor
- Warsaw University of Technology, Poland
Bibliografia
- Dąbrowa, T., Gajadhur, M., 2006, Colour Gamut of a Press Print and Dependence of the Basic Attributes of Overprint Colours on the Process Ink Film Thickness, Surface Coatings International Part B: Coatings Transactions, vol. 89, p. 305-314.
- Gajadhur, M., Podsiadło, H., 2008, The Ink Film Thickness Optimization in Offset Printing for the Matte-coated Paper Bose, Proceedings of III Scientific and Technical Student and Aspirant Conference, Warsaw, p. 19-24.
- ISO 12647-2, 2004, Graphic Technology - Process Control for the Production of Half-tone Colour Separations, Proof and Production Prints - Part 2: Offset Lithographic Processes.
- ISO 2834-1, 2006, Graphic Technology - Laboratory Preparation of Test Prints-Part 1: Paste Inks.
- ISO 2846-1, 2006, Graphic Technology - Colour and Transparency of Printing Ink Sets for Four Colour Printing - Part 1: Sheet-fed and Heat-set Web Offset Lithographic Printing.
- Yang, L., Kruse, B., 2001, Chromatic Variation and Color Gamut Reduction due to Ink Penetration, Proceedings of TAGA conference, San Diego.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.ekon-element-000171200775