PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2015 | 77 | 89--99
Tytuł artykułu

The Management of Knowledge Obtainted from the Vibration Signal in Evaluation of Degradation State

Warianty tytułu
Zarządzanie wiedzą uzyskaną z sygnału drgań w ocenie stanu degradacji
Języki publikacji
EN
Abstrakty
EN
The knowledge of the dynamic state and structure of the system allows describe its behavior, and allows creating prognosis models of the system behavior in the function of dynamic evolution time, based on the model of the technical state symptoms growth. Most often, however, there are no known equations describing behaviors of the system in the function of dynamic evolution time, which accounts for the need to apply new tools to examine the dynamic state. There is, therefore, the requirement to experimentally verify analytical technical models as the proper one is a model which is verified in practice. An experiment is, therefore, often only an inspiration for further researches leading to the optimization of the construction. In this work presented are chosen problems of machines' technical state diagnosis with the use of identification and technical diagnostics methods. Relations between methods of dynamic state evaluation and methods of technical state evaluation were indicated. Example modal analysis results illustrate the complexity of projecting dynamic state researches into diagnostic researches of machine state evaluation. (original abstract)
Znajomość stanu dynamicznego i struktury systemu pozwala opisać jego zachowanie, i pozwala na tworzenie modeli prognozowaniu zachowania systemu w funkcji czasu ewolucji dynamicznej, opartej na modelu rozwoju technicznego objawy stanu. Najczęściej jednak nie są znane równania opisujące zachowania systemu w funkcji czasu ewolucji dynamicznej, co stanowi konieczność zastosowania nowych narzędzi do badania stanu dynamicznego. Istnieje zatem zapotrzebowanie na doświadczalnie sprawdzenia analiz modeli techniczne jak właściwy, jest wzorem, który został zweryfikowany w praktyce. Eksperyment jest zatem często tylko inspiracji do dalszych badań prowadzących do optymalizacji konstrukcji. W pracy prezentowane są wybrane problemy techniczne diagnozy stanu maszyn z wykorzystaniem metod identyfikacji i diagnostyki technicznej. Wskazano stosunki między metody dynamicznej oceny stanu technicznego i metod oceny stanu. Przykład modalne wyniki analizy pokazują złożoność badań dynamicznych projekcji do badań diagnostycznych stanu oceny stanu maszyny. (abstrakt oryginalny)
Rocznik
Tom
77
Strony
89--99
Opis fizyczny
Twórcy
  • University of Technology and Life Sciences in Bydgoszcz, Poland
  • University of Technology and Life Sciences in Bydgoszcz, Poland
autor
  • University of Żilina, Slovakia
Bibliografia
  • [1] J.S. Bendat, A.G. Piersol: Methods of analysis and measurement of random signals, [in Polish] PWN, Warszawa, 1996.
  • [2] Cempel С., Natke H.G.: An introduction to the holistic dynamics of operating systems. Progress Report No.2, CRI-B- 2/92,1996.
  • [3] C. Cempel: Vibroacoustical Condition Monitoring, Ellis Hor. Ltd., Chichester, New York, 1991.
  • [4] W. Cholewa, J. Kiciński: Technical diagnostics. Reverse diagnostic models, [in Polish] Wydawnictwo Politechniki Śląskiej, Gliwice 1997.
  • [5] J. Giergiel, Т. Uhl: Identification of mechanical systems, [in Polish] PWN, Warszawa, 1990.
  • [6] Durica P., Juras P., Gaspierik V., Rybarik J.: Long- term monitoring of thermo-technical properties of lightweight construction of external walls being exposed to the real conditions. In Procedia Engineering,111 (2015) pp.176- 182.
  • [7] Eykhoff P.: Identyfikacja w układach dynamicznych. BNInż., Warszawa 1980.
  • [8] Findeisen W. ii: Analiza systemowa - podstawy i metodologia. PWN, Warszawa 1985.
  • [9] Hadzima В., Vican J.ii: Influence of tempering on the deformation level of the multi-layer hard faced samples. In Procedia Engineering, 111 (2015) pp. 49-56.
  • [10] H. Kaźmierczak, J. Kromulski: Methods of parametric identification in application into construction diagnostics, Exploitation Problems, [in Polish], 6/93, MCNEMT, Radom, 1993.
  • [11] Niziński S., Michalski R.: Diagnostyka obiektów technicznych. ITE, Radom 2002.
  • [12] H. Tylicki: Optimization of the process of vehicle mechanical state prognosis, [in Polish] Rehabilitation thesis, No 86, ATR Bydgoszcz, 1999.
  • [13] T. Uhl: Computer-enhanced identification of mechanical construction models, [in Polish] WNT, Warszawa 1997.
  • [14] Uhl Т., Giergiel J.: Identyfikacja układów mechanicznych. PWN, Warszawa 1990.
  • [15] Vican J., Jost J., Gocal J.: Analysis of the stringer-to-cross-beam revitedjoints behaviour, In: Civil and environmental engineering, ISSN 1336-5835, vol. 10, no. 1 (2014), s. 50-60.
  • [16] Zeigler В.: Teoria modelowania i symulacji. PWN, Warszawa 1984.
  • [17] Żółtowski B.ii: Structural diagnosis of rail vehicles and method for redesign. Diagnostyka Vol.15 (3), 2014.
  • [18] Żółtowski В. ii: A hydrogenic electrolyzer for fuels. Polish Maritime Research, Vol.21 (4), 2014.
  • [ 19] Żółtowski B.II: Doskonalenie strategii utrzymania zdatności maszyn | [Improvement the systems of exploitation machine], Journal of Konbin, Vol.20 (1), 2012.
  • [20] Zoltowski В.: Bierny eksperyment diagnostyki drganiowej maszyn. [Passive Experiment of the Vibration of Machines Diagnosis], Archiwum Budowy Maszyn, Vol.33 (4) 1986.
  • [21] Żółtowski В. ii.: Study of the state Francis Turbine. Polish Maritime Research, No. 2/ (78), vol.20, ISSN 1233-2585,2013, pp. 41 18.
  • [22] B. Żółtowski: Diagnostic identification of technical objects, Problems of machines exploitation, [in Polish] Z.l (105). PAN. 1996.
  • [23] B. Żółtowski: Machine diagnostics basic, [in Polish] Wyd. ATR, Bydgoszcz, 1996.
  • [24] B. Żółtowski: Multidimensional monitoring of the track-vehicle interface of a railway system, Besanson, 2007.
  • [25] B. Zoltowski, L. Castaneda: Monitoreo Multidimensional de la Interfase Via-Vehiculo de un Sistema Ferroviario, Congreso Internacional de Mantenimiento - ÄCIEM - Marzo 2007, Bogota, Colombia.
  • [26] Żółtowski M.: Investigations of harbour brick structures by using operational modal analysis. Polish Maritime Research, No. 1/ (81), vol.21, ISSN 1233-2585, 2014, pp. 42-54.
  • [27] Żółtowski M.: Assessment State of Masonry Components Degradation. Applied Mechanics and Materials Vol. 617(2014), Trans Tech Publications, Switzerland 2014, ISSN 1662-7482. pp. 142-147.
  • [28] Żółtowski В., Żółtowski M.: Vibrations in the Assessment of Construction State. Applied Mechanics and Materials Vol. 617(2014), Trans Tech Publications, Switzerland 2014,. ISSN 1662-7482. pp. 136-141.
  • [29] Żółtowski M.: Badanie niezawodności elementów infrastruktury murowej z użyciem operacyjnej analizy modalnej. Materiały XLI Zimowej Szkoły Niezawodności, Szczyrk 2013, pp.127-129.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.ekon-element-000171404137

Zgłoszenie zostało wysłane

Zgłoszenie zostało wysłane

Musisz być zalogowany aby pisać komentarze.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.