PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2018 | nr 4 (67) | 176--188
Tytuł artykułu

Impact of Technical Systems Efficiency and Calculation Method on Evaluation of Building Energy Performance and Carbon Emission

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This work determines the influence of building technical systems efficiency and uses a calculation method for the evaluation of whole building energy efficiency and carbon emission. Two types of commercial buildings are considered: an office building and multifunctional building and these are examined by two methods to determine the efficiency of the building systems. The analysis was performed for two different thickness of pipes and ducts thermal insulation in a heat distribution system: according to minimum energy saving requirements and with doubled thickness. It was found that selection of the applied calculation method has significant impact on energy efficiency of building services evaluation and as a consequence - on the energy efficiency evaluation of the whole building and its emissivity. (original abstract)
Rocznik
Numer
Strony
176--188
Opis fizyczny
Twórcy
  • West Pomeranian University of Szczecin, Poland
Bibliografia
  • Boeri A. et al. (2013), Energy efficient envelope for renovation of terraced housing, Proceedings of the International Conference Portugal SB13 - contribution of sustainable building to meet EU 20-20-20 targets, 30th October - 1st November 2013, Guimarães, Portugal, Universidade do Mincho, Técnico Lisboa, iiSBE Portugal, p. 605-614.
  • Bøhm B. (2013), Production and distribution of domestic hot water in selected Danish apartment buildings and institutions. Analysis of consumption, energy efficiency and the significance for energy design requirements of buildings, "Energy Conversion and Management" No. 67, p. 152-159, DOI: 10.1016/j.enconman.2012.11.002.
  • Broniewicz M. (2017), Energy efficiency of steel buildings, "Ekonomia i Środowisko" No. 4(63), p. 18-28.
  • Čarnogurská M. et al. (2016a), Application of dimensional analysis in determining the heat loss in district heating systems, "Acta Polytechnica" No. 56, p. 81-87.
  • Čarnogurská M. et al. (2016b), Measurement and mathematical modeling of heat loss in the pipe systems of a central heat distribution network, "Measurement J. of the International Measurement Confederation" No. 94, p. 806-811.
  • EU (2010), Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings, L 153/13.
  • FIN (2002), General Quality Requirements for HVAC Systems in Buildings, RYL - Rakentamisen yleiset laatuvaatimukset.
  • FIN (2011), FIN31 Building code CD5: Guidelines for the calculation of power and energy needs for heating of buildings, Ministry of the Environment.
  • Himpe E. et al. (2014), Heat losses in collective heat distribution systems: an improved method for EPBD calculations, The 14th International Symposium on District Heating and Cooling, September 7th to September 9th, Stockholm, Sweden.
  • Klimczak M. et al. (2018), Possibility of reducing the costs of hot water distribution while maintaining the user\'s comfort, E3S Web of Conferences 44, 00067, DOI: 10.1051/e3sconf/20184400067.
  • KOBIZE (2017a), Calorific values and CO2 emission factors in 2015 for reporting within Emission Trading System for 2018, The National Centre of Emission Management, Warsaw.
  • KOBIZE (2017b), Emission factors for CO2, SO2, NOx, CO and total dust for electricity on the basis of information contained in the National Database on greenhouse gas emissions and other substances for 2016, The National Centre of Emission Management, Warsaw.
  • Lausten J. (2008), Energy efficiency requirements in building codes, energy efficiency polices for new buildings, IES Information paper, International Energy Agency (IEA), Paris.
  • Lewis J.O. et al. (2013), Cities of Tomorrow - Action Today. URBACT II Capitalisation. Building Energy Efficiency in European Cities, Saint-Denis: URBANACT.
  • Morvay Z.K. et al. (2008), Applied Industrial Energy and Environmental Management, John Willey&Sons, Ltd, p. 429-430, DOI: 10.1002/9780470714379.
  • McNabb A. et al. (1980), Heat Losses from an Insulated Pipe, "Journal of Mathematical Analysis and Aplications" No. 77, p. 270-277.
  • Pedro J.B. et al. (2010), Technical building regulations in EU countries: a comparison of their organization and formulation, COBRA 2011 - RICS Construction and Property Conference, At Manchester.
  • Pellegrini M et al. (2018), The Innovative Concept of Cold District Heating Networks: A Literature Review, "Energies" No. 11, 236, DOI: 10.3390/en11010236.
  • PL (2002), Directive by the Minister of Infrastructure of 12 April 2002 on the technical conditions that buildings and their location should satisfy, the Journal of laws of the Republic of Poland, No. 75 item 690 with later amendments.
  • PL (2015), Directive by the Minister of Infrastructure of 18 March on the methodology for determining the energy performance of a building or part of a building and building performance certificates, the Journal of laws of the Republic of Poland, Item 376.
  • PN (2006), Polish Standard PN-EN 12831 (2006) Heating systems in buildings - Method for calculation of the design heat load, Polish Standardization Committee, Warsaw.
  • PN (2009), Polish Standard PN-EN ISO 13790 (2009) Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008), Polish Standardization Committee, Warsaw.
  • Romanova N. (2016), Heat distribution losses in ventilation heating systems, Mikkeli University of Applied Sciences, May 2016, http://urn.fi/URN:NBN:fi:amk-2016 053010885.
  • Silva S. et al. (2013), Using MCDA to Select Refurbishment solutions to Improve Building IEQ, Proceedings of the International Conference Portugal SB13 - contribution of sustainable building to meet EU 20-20-20 targets, 30th October - 1st November.
  • Tanasa C. et al. (2013), Energy consumption and thermal comfort of e passive house built in Romania, Proceedings of the International Conference Portugal SB13 - contribution of sustainable building to meet EU 20-20-20 targets, 30th October - 1st November 2013, Guimarães, Portugal, Universidade do Mincho, Técnico Lisboa, iiSBE Portugal, p. 161-168.
  • Vaillant Rebollar J.E. et al. (not referred), Influence of recirculation strategies in collective heat distribution systems on the performance of dwelling heating substations, https://biblio.ugent.be/publication/7036593/file/7036600.pdf [20-12-2018].
  • Vaillant Rebollar J.E. et al. (2016), Sensitivity analysis of heat losses in distribution systems: impact of different building typologies, 18 Convención Científica de Ingeniería y Arquitectura, Palacio de Convenciones de la Habana, 21-25 November 2016.
  • Yang W. et al. (2018), Modeling of a District Heating Systems and Optional Heat-Power Flow, "Energies" No. 11, 929, DOI: 10.3390/en11040929.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.ekon-element-000171543002

Zgłoszenie zostało wysłane

Zgłoszenie zostało wysłane

Musisz być zalogowany aby pisać komentarze.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.