The Design Technique of Melting Units for Production of Synthetic Fibrous Materials by Vertical Blowing Method

• Autorzy: Vladislav Sviatskii , Pavol Božek , Mikhail Sokolov , Zygmunt Łukaszczyk
• Języki publikacji: EN

Abstrakty

EN

This paper presents the technology of production of synthetic fibrous materials from PET-row by vertical blowing method. The formation of fibers from the melt of thermoplastics by vertical blowing method is accompanied by complex and specific phenomena, so creation of new progressive technologies, high-performance machines and units for producing such materials is impossible without process modeling, which can significantly reduce the number of natural tests, cost and development time and choose optimal operating modes. The motion of the molten material in the melting unit of the hydrostatic type is determined from the Poiseuille formula. Also in the article proved that the greatest impact on process productivity is made by the melting unit, exactly by outlet radius and the pressure change of compressed air, acting on the molten material surface. The increase in the height of the molten material column in the main cylindrical chamber of melting unit also leads to increase of process productivity. (original abstract)

Słowa kluczowe

PL

Technologia; Materiałoznawstwo; Inżynieria materiałowa

EN

Technology; Materials science; Materials engineering

• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2019
• Tom: 1(27)
• Strony: 29--32

Twórcy

autor

Vladislav Sviatskii

• Izhevsk State Technical University, Russia

autor

Pavol Božek

• Slovak University of Technology, Bratislava, Slovak Republic

autor

Mikhail Sokolov

• Tambov State Technical University, Russia

autor

Zygmunt Łukaszczyk

• Silesian University of Technology

Bibliografia

• B.A. Sentyakov, K.P. Shirobokov and V.M. Svyatskiy. "Voloknistyy sorbent dla sbora nefti na osnove polietilentereftalata". Predotvrashcheniye avariy zdaniy i sooruzheniy: Sbornik naucznych trudov, issue 9, pp. 631-634, 2010.
• V.M. Svyatskiy. Eksperimental'noye issledovaniye sorbtsionnoy sposobnosti polietilentereftalatnogo volokna pri sbore nefti s poverkhnosti vody / V.M. Svyatskiy, M.A. Svyatskiy, B.A. Sentyakov, K.A. Fonareva/Ekologi promyshlennogo proizvodstva: Mezhotr. nauch.-prakt. zhurnal FGUP «VIMI» - Moskva: 2013, Vyp. 3. pp. 53-57.
• V.M. Sviatskiy, B.A. Sentyakov and M.A. Sviatskiy. "Simulation of air flow rate at point of contact with a stream of melted polymeric material". Acta Tecnologia, vol. 2, no. 3, pp. 1-4, 2016.
• V.M. Svyatskiy. Strukturnaya schema protsessa proizvodstva izdeliy iz voloknistykh materialov na osnove vtorichnogo sinteticheskogo syr'ya / V.M. Svyatskiy, B.A. Sentyakov // Avtomatizatsiya. Sovremennyye tekhnologii - Moskva: 2015, - №11. pp. 3-7.
• V.M. Svyatskiy. "Perspektivy proizvodstva teploizolyatsionnykh materialov na osnove polietilentereftalata" in Aktual'nyye voprosy sovremennoy techniki I technologii: Sbornik dokladov Mezhdunarodnoy nauchnoy konferentsii, vol. 1. A.V. Gorbenko and S.V. Dovzhenko. Lipetsk: Izdatel'skiy tsentr «De-fakto», 2010, pp. 148-150.
• V.M. Svyatskiy, B.A. Sentyakov, M.A. Svyatskiy, K.B. Sentyakov and S.A. Garayev. "Modelirovaniye protcessa formoobrazovaniya kholstov iz voloknistykh materialov". Vestnik IzhGTU, no. 2, pp. 17-20, 2015.
• S.P. Papkov. Teoreticheskiye osnovy proizvodstva khimicheskikh volokon. Moscow: Khimiya, 1990.
• P.YU. Apel' and S.N. Dmitriyev. "Optimizatsiya formy por trekovykh membran. Kriticheskiye tekhnologii". Membrany, vol. 23, no. 3, pp. 32-37, 2004.
• G.M. Gusinskiy, Ye.B. Kremer, M.I. Kremer and B.V. Mchedlishvili. "Opredeleniye razmerov mikropor yadernykh mikrofil'trov s malym diametrom". Inzhenerno- fizicheskiy zhurnal, vol. 37, 1979.

Identyfikatory

DOI

10.1515/mspe-2019-0005