Preliminary testing of the internal gear pump with modifications of the sickle insert

• Autorzy: Piotr Antoniak , Michał Stosiak , Krzysztof Towarnicki
• Języki publikacji: EN

Abstrakty

EN

This paper presents the modifications that have been made to the sickle insert of the gear pump with internal gearing. This procedure allowed the obtainment of radial compensation. The test stand to plot the characteristics of the pump before, as well as after the first and second modification is discussed. The results of the measurements from the tests conducted are presented. The results obtained confirmed the achievement of radial compensation by cutting the appropriate channel in the sickle insert. As a result, it will be possible to obtain a higher discharge pressure for this type of pump and to increase its efficiency.(original abstract)

Słowa kluczowe

EN

Tests; Measurement; Drive system

PL

Testy; Pomiary; Układ napędowy

• Czasopismo: Acta Innovations
• Rocznik: 2019
• Numer: nr 32
• Strony: 84--90

Twórcy

autor

Piotr Antoniak

• WrocławUniversity of Science and Technology, Faculty of Mechanical Engineering

autor

Michał Stosiak

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering

autor

Krzysztof Towarnicki

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering

Bibliografia

• W.Błażejewski, M. Lubecki, P. Mayer, M. Stosiak and K. Towarnicki, The use of new materials in elements and hydraulic systems, NiSHiP conference materials, Center for Appraisal and Personnel Development of the SIMP Branch in Wrocław, [2018]. pp. 23-24.
• W. Fiebig and M. Korzyb, Vibration and dynamic loads in external gear pumps. Archives of Civil and Mechanical Engineering. 2015, vol. 15, No. 3, pp. 680-688
• W. Kollek, P. Osinski, M. Stosiak, A. Wilczyński and P. Cichon: Problems relating to high-pressure gear micopumps. Archives of Civil and Mechanical Engineering (14) 2014, pp. 88-95.
• W. Kollek, Fundamentals of design, modeling, operation of microhydraulic components and systems(In Polish).Oficyna Wydawnicza PWr, Wrocław, 2011, 2 -Mikrohydraulika, Hydraulika i Pneumatyka, nr 6/1999
• J. Stryczek, M. Banaś, J. Krawczyk, L. Marciniak, P. Stryczek: The fluid power elements and systems made of plastics. Procedia Engineering, 2017, vol. 176, pp. 600-609
• Entwiklung der Hydraulik für mobile Anwendungen. 12 A FK Aachen 1996.
• P. Śliwiński, New satellite pumps. Key Engineering Materials, vol. 490 (2012) pp. 195-205
• M. Rundo, Theoretical flow rate in crescent pumps, Simulation Modelling Practice and Theory, vol.71, February 2017, pp. 1-14
• E. B. Lewis, H. Cyndi, Selecting internal gear pumps for difficult duties. World Pumps, vol. 2005, Issue 462, March 2005, pp. 26-27
• P. Antoniak, M. Stosiak, K. Towarnicki, Preliminary testing of the gear pumpwith internal gearing with modification of the sickle insert, In: Engineering Mechanics 2019 : 25th international conference. May 13-16, 2019, Svratka, Institute of Thermomechanics of the Czech Academy of Sciences, 2019. pp. 33-36.
• R. P. Lambeck, Hydraulic pumps and motors. Marcel Dekker INC, New York (1983)
• J. Stryczek, S. Bednarczyk and K. Biernacki, Gerotor pump with POM gears: design, production technology, research.Archives of Civil and Mechanical Engineering. 2014, vol. 14, No. 3, pp. 391-397

Identyfikatory

DOI

10.32933/ActaInnovations.32.9