Ensuring the Economic Effiency of Enterprises by Multi-Criteria Selection of the Optimal Manufacturing Process

• Autorzy: Alexey Kotliar , Yevheniia Basova , Vitalii Ivanov , Olena Murzabulatova , Svitlana Vasyltsova , Mariia Litvynenko , Olena Zinchenko
• Języki publikacji: EN

Abstrakty

EN

Technological assurance and improvement of the economic efficiency of production are the first-priority issues for the modern manufacturing engineering area. It is possible to achieve a higher value of economic efficiency in multiproduct manufacturing by multicriteria optimization. A set of optimality criteria based on technological and economic indicators was defined with the aim of selecting the optimal manufacturing process. Competitive variants and a system of optimization were developed and investigated. A comparative analysis of the optimality criteria and their influence on the choice of optimal machining processes was carried out. It was determined that the batch of parts made an impact on the selection of the manufacturing process. (original abstract)

Słowa kluczowe

EN

Multiple criteria optimization; Enterprise effectiveness; Economic efficiency; Profit on business activities; Production process

PL

Optymalizacja wielokryterialna; Efektywność przedsiębiorstwa; Efektywność ekonomiczna; Zysk w działalności gospodarczej; Proces produkcji

• Czasopismo: Management and Production Engineering Review
• Rocznik: 2020
• Tom: 11
• Numer: nr 1
• Strony: 52--61

Twórcy

autor

Alexey Kotliar

• National Technical University "Kharkiv Polytechnic Institute", Ukraine

autor

Yevheniia Basova

• National Technical University "Kharkiv Polytechnic Institute", Ukraine

autor

Vitalii Ivanov

• Sumy State University, Ukraine

autor

Olena Murzabulatova

• Kharkiv National University of Radio Electronics, Kharkiv, Ukraine

autor

Svitlana Vasyltsova

• National Technical University "Kharkiv Polytechnic Institute", Ukraine

autor

Mariia Litvynenko

• National Technical University "Kharkiv Polytechnic Institute", Ukraine

autor

Olena Zinchenko

• National Technical University "Kharkiv Polytechnic Institute", Ukraine

Bibliografia

• Ivanov V., Dehtiarov I., Pavlenko I., Kosov I., Kosov M., Technology for complex parts machining in multiproduct manufacturing, Management and Production Engineering Review, 10, 2, 26-36, 2019, doi: 10.24425/mper.2019.129566.
• Missbauer H., Order release planning by iterative simulation and linear programming: Theoretical foundation and analysis of its shortcomings, European Journal of Operational Research, 280, 2, 495507, 2020, doi: 10.1016/j.ejor.2019.07.030.
• Babiceanu R.F., Seker R., Cloud-Enabled Product Design Selection and Manufacturing as a Service, [in:] Borangiu T., Trentesaux D., Leitao P., Giret Boggino A., Botti V. [Eds], Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future, SOHOMA 2019, Studies in Computational Intelligence, Springer, Cham, 853, 210-219, 2020, doi: 10.1007/978-3-030-27477-1.16.
• Li W., Zheng X., Research on the airworthiness compliance strategy of composite structure, Lecture Notes in Mechanical Engineering, pp. 256-264, 2020, doi: 10.1007/978-3-030-21503-3-20.
• Hamrol A., Zerbst S., Bozek M., Grabowska M., Weber M., Analysis of the conditions for effective use of numerically controlled machine tools, Advances in Manufacturing. Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 3-12, 2018, doi: 10.1007/978-3-319-68619-6,1.
• Redko R., Zabolotnyi O., Redko O., Savchuk S., Kovalchuk V., Improvement of manufacturing technology and recovery of clamping collets for lathe automats, Advances in Design, Simulation and Manufacturing II, DSMIE-2019. Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 290-301, 2020, doi: 10.1007/978-3-030-22365-6.29.
• Krol O., Sokolov V., Modelling of spindle nodes for machining centers, Journal of Physics: Conference Series, 1084, 1, 012007, 2018, doi: 10.1088/1742-6596/1084/1/012007.
• Krol O., Sokolov V., Modeling carrier system dynamics for metal-cutting machines, 2018 International Russian Automation Conference, RusAuto- Con 2018, IEEE, 2018, doi: 10.1109/RUSAUTO- CON.2018.8501799.
• Karpus V., Ivanov V., Dehtiarov I., Zajac J., Kurochkina V. Technological assurance of complex parts manufacturing, Advances in Design, Simulation and Manufacturing, DSMIE-2018, Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 51-61, 2019, doi: 10.1007/978-3-319-93587-4.6.
• Ivanov V., Pavlenko I., Kuric I., Kosov M., Mathematical modeling and numerical simulation of fixtures for fork-type parts manufacturing, Industry 4.0: Trends in Management of Intelligent Manufacturing Systems, EAI/Springer Innovations in Communication and Computing, Springer, Cham, pp. 133-142, doi: 10.1007/978-3-030-14011-3.12.
• Ivanov V., Dehtiarov I., Pavlenko I., Kosov M., Hatala M., Technological assurance and features of fork-type parts machining, Advances in Design, Simulation and Manufacturing II, DSMIE-2019, Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 114-125, 2020, doi: 10.1007/978-3-03022365-6.12.
• Kotliar A., Basova Y., Ivanova M., Gasanov M., Sazniev I., Technological Assurance of Machining Accuracy of Crankshaft, Advances in Manufacturing II, Vol. 5 - Metrology and Measurement Systems, Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 37-51, 2019, doi: 10.1007/9783-030-18682-1.4.
• Dobrotvorskiy S., Basova Y., Ivanova M., Kotliar A., Dobrovolska L., Forecasting of the productivity of parts machining by high-speed milling with the method of half-overlap, Diagnostyka, 19, 3, 37-42, 2018, doi: 10.29354/diag/93136.
• Kotliar A., Gasanov M., Basova Y., Panamariova O., Gubskyi S., Ensuring the reliability and performance criterias of crankshafts, Diagnostyka, 20, 1, 23-32, 2019, doi: 10.29354/diag/99605.
• Dobrotvorskiy S., Basova Y., Kononenko S., Dobrovolska L., Ivanova M., Numerical deflections analysis of variable low stiffness of thin-walled parts during milling, Advances in Design, Simulation and Manufacturing II, DSMIE-2019, Lecture Notes in Mechanical Engineering, Springer, Cham, pp. 4353, 2020, doi: 10.1007/978-3-030-22365-^5.
• Shigemoto Y., Designing Emotional Product Design: When Design Management Combines Engineering and Marketing, Advances in Intelligent Systems and Computing, 952, 28-39, 2020, doi: 10.1007/978-3-030-20441-9.4.
• Wang T.-N., Hung Y.-H., Lean Application: The Design Process and Effectiveness, [in:] 2nd International Conference on Human Systems Engineering and Design: Future Trends and Applications. Advances in Intelligent Systems and Computing, 1026, 456-461, 2020, doi: 10.1007/978-3-030-27928-8.69.
• Kreis A., Hirz M., Stadler S., A contribution to optimized data exchange supporting automotive bodywork engineering, Computer-Aided Design and Applications, 17, 1, 178-189, 2020, doi: 10.14733/cadaps.2020.178-189.
• Kaspar J., Choudry S.A., Landgrebe D., Vielhaber M., Concurrent and geometry-dependent selection of material and joining technology - An initial utility-based systematic decision-making tool, [in:] 12th Annual IEEE International Systems Conference, Vancouver, BC, Canada, CFP18SYT-ART; 2018, 136824, doi: 10.1109/SYSCON.2018.8369549.
• Hrinov V., Khorolskyi A., Improving the process of coal extraction based on the parameter optimization of mining equipment, [in:] E3S Web of Conferences, 60, 00017, 2018, doi: 10.1051/e3sconf/20186000017.
• Raymond L., Operations management and advanced manufacturing technologies in SMEs: A contingency approach, Journal of Manufacturing Technology Management, 16, 8, 936-955, 2005, doi: 10.1108/17410380510627898.
• Maryam N., Khan S.A., Business process reengineering for smart manufacturing, [in:] 8th IEEE Annual Ubiquitous Computing, Electronics and Mobile Communication Conference, UEMCON, New York, NY, USA, pp. 424-430, 2017, doi: 10.1109/UEMCON.2017.8249028.
• Mosayeb Motlagh M., Azimi P., Amiri M., Madraki G., An efficient simulation optimization methodology to solve a multi-objective problem in unreliable unbalanced production lines, Expert Systems with Applications, 138, 112836, 2019, doi: 10.1016/j.eswa.2019.112836.
• Azimi P., Farhadi N., Developing a New Integrated Bi-Objective Model for Buffer and Process Time Optimization Problem using Optimization via Simulation Approach, Mathematical Models and Computer Simulations, 10, 3, 373-386, 2018, doi: 10.1134/S207004821803002X.
• Kumar R., Jesudoss Hynes N.R., Pruncu C.I., Jennifa Sujana J.A., Multi-objective optimization of green technology thermal drilling process using grey-fuzzy logic method, Journal of Cleaner Production, 236, 117711, 2019, doi: 10.1016/j.jclepro.2019.117711.
• Zhou G., Lu Q., Xiao Z., Zhou C., Tian C., Cutting parameter optimization for machining operations considering carbon emissions, Journal of Cleaner Production, 208, 937-950, 2019.
• Satish Kumar B., Raju G.J., Janardhana G.R., Multi objective scheduling optimization in flexible manufacturing system by jaya algorithm, International Journal of Engineering and Advanced Technology, 8, 4, 865-871, 2019.
• Yang X., He T., Sun C., A process planning method based on firefly algorithm, International Journal of Internet Manufacturing and Services, 5, 2-3, 310-322, 2018, doi: 10.1504/IJIMS.2018.092003.
• Karpus V.E., Kotliar A.V., Multi-criteria optimization of technological systems of machining [Mnogokriterialnaja optimizasija tehnologicheskih sistem mehanicheskoj obrabotk], Vestnik machinostroenija, 6, 76-83, 2012.
• Savitskaja G.V., Economic analysis of the enterprise [Ekonomichniy analiz dijalnosti pidpriemstva], 1-st ed. Kiev: Znannja, 2001.
• Alekseeva M.M., Business Planning [Planirovanie dejatelnosti firmu], 1st ed. Moscow: Finansu i statiatika, 2001.
• Antuchev G.S., Methods for parametric synthesis of complex technical systems [Metodu parametricheskogo sinteza slojnuch tehnicheskih system], 1-st ed. Moscow: Nayka, 1989.

Identyfikatory

DOI

10.24425/mper.2020. 132943