PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2019 | vol. 2(1) cz.I Part I: Modern Machines and Technologies for Mining | 153--167
Tytuł artykułu

Simulation of the Frequency Response of the ERC 1400 Bucket Wheel Excavator Boom, During the Excavation Process

Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper deals with the modal analysis and frequency response analysis of a bucket wheel excavator (BWE) boom, obtained by simulation, based on a virtual model of an existing BWE boom. The boom, which generally is realized as a spatial truss, is the most vulnerable subsystem of the BWE, being submitted to severe operational loads characterized by very pronounced cyclical, dynamic and stochastic variability. This vulnerability is the consequence of its shape and constructive parameters and the nature, source and character of the external exciting loads to which it is exposed. The classical approach recommended by standards and norms cannot predict the occurrence of failures caused by vibration, which produces fatigue due to the load's cyclical variability and the deformation produced by resonant vibration of some constitutive elements. As exciting load we considered the operational forces acting on the bucket wheel. In this manner we can take into account the constructive features - with modal analysis, and the vibration regime - with frequency response analysis. The proposed method is useful both in the design phase of new load-bearing structures of truss type subjected to high-variability forces, and also in refurbishment or improvement phases of the existing structures of this kind. (original abstract)
Twórcy
  • University of Petroșani, Romania
  • University of Petroșani, Romania
  • University of Petroșani, Romania
  • University of Petroșani, Romania
Bibliografia
  • Aggogeri, F., Borboni, A., Merlo, A., Pellegrini, N. and Ricatto R. (2017). Vibration Damping Analysis of Lightweight Structures in Machine Tools. Materials, 10(3), 297.
  • Boskovic, S., Jovancic, P., Ignjatovic, D., Rakicevic, B., Maneski, T. (2015). Vibration as deciding parameter during revitalization process for replacing the bucket wheel drive. Journal of Vibroengineering, 17(1), pp. 24-32.
  • Bošnjak, S.M., Oguamanam, D.C.D., Zrnić, N.Đ. (2015). The influence of constructive parameters on response of bucket wheel excavator superstructure in the out-ofresonance region. Archives of Civil and Mechanical Engineering, 15(4), pp. 977- 985.
  • Chudnovskii, V. Yu. (2007). Horizontal Vibrations of the Excavating Part of a Rotary Excavator and Their Suppression. Journal of Machinery Manufacture and Reliability, 36(3), pp 224-228.
  • Drebenstedt, C., Paessler, S. (2006). Output calculation model of bucket wheel excavator, supported by virtual reality with regard to the slewing velocity at the turning point. In: 8thInternational Symposium Continuous Surface Mining. Aachen: ISCSM 2006, pp.119-123 .
  • German Institute for Standardization. (2015). DIN 22261-2. Excavators, Stackers and Auxillary Equipment in Brown Coal Open Cut Mines Part 2 Calculation Principals.
  • Gottvald, J. (2010). The calculation and measurement of the natural frequencies of the bucket wheel excavator schrs 1320/4X30. Transport, 25(3), pp. 269-277.
  • Kertesz (Brînaş), I. (2018). Simulareaşimodelareaparametrilor de funcţionare a rotoruluiexcavatoarelorîntimpulprocesului de excavare, PhD Research Report. University of Petroşani.
  • Kurowski, P. M. (2015). Engineering Analysis with SOLIDWORKS® Simulation. Mission: SDC Publications.
  • Kurowski, P.M. (2016). Vibration Analysis with SOLIDWORKS® Simulation. Mission: SDC Publications.
  • Muhammad, S.A., Jamil, M., Iqbal, J., Khan, M.N., Malik, M.H. and Butt, S.I. (2016). Modal Analysis of Ship's Mast Structure using Effective Mass Participation Factor. Indian Journal of Science and Technology, 9(21), pp. 1-5.
  • Nan, M.S. (2007). Parametriiprocesului de excavare la excavatoarele cu rotor. Petroşani: Universitas.
  • Pietrusiak, D., Smolnicki, T., Stańco, M. (2017). The influence of superstructure vibrations on operational loads in the undercarriage of bulk material handling machine. Archives of Civil and Mechanical Engineering, 17(4), pp. 855-862.
  • Priestley, M.J.N., Seible, F., Calvi, G.M. (1996). Seismic design and retrofit of bridges. New York: John Wiley & Sons Inc.
  • Radu, S.M., Popescu, F.D., Andraș, A. and Kertesz, (Brînaş) I. (2018). Simulation and modeling of the forces acting on the rotor shaft of BWEs, in order to improve the quality of the cutting process. Annals of the University of Petroşani. Mechanical Engineering, 20, pp. 63-72.
  • Rasper, L. (1975). The Bucket Wheel Excavator, Developement - Design - Application. Germany: Trans Tech Publication.
  • Rea, D., Clough, R. W., Bouwkamp, J.G. (1971). Damping capacity of a model steel structure. A Report to American Iron and Steel Institute. New York.
  • ROMINEX S.A. (2007). Excavatorul cu roatăportcupe ERc 1400 - 30/7 modernizat, instrucţiuni de exploatare, întreţinereşireparaţii. Timişoara.
  • Rusinski, E., Dragan, S., Moczko, P., Pietrusiak, D. (2012). Implementation of experimental method of determining modal characteristics of surface mining machinery in the modernization of the excavating unit. Archives of Civil and Mechanical Engineering, 12(4), pp. 471-476.
  • Vîlceanu, V. F. (2018). Studiulduratei de viaţăpentruutilajele de extragereşidepunereîndepozite, utilizateîncarierele din bazinul Olteniei, PhD. University of Petroșani.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.ekon-element-000171588081

Zgłoszenie zostało wysłane

Zgłoszenie zostało wysłane

Musisz być zalogowany aby pisać komentarze.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.