Applying Harmonic Analysis in the Measurements of Geometrical Deviations Of Crankshafts - Roundness Shapes Analysis

• Autorzy: Krzysztof Nozdrzykowski
• Języki publikacji: EN

Abstrakty

EN

The article presents measuring procedures and principles of determining deviations of shape and location of the crankshaft main necks assembly axis. We also described mathematical methods of roundness shapes description based on the harmonic analysis theory for the cases when the shaft is set with the external journals in prisms and for the case when the shaft is set on the external front faces in the claws. The results of sample calculations realized on the basis of the proposed mathematical methods have been presented in a form of diagrams of so called amplitude spectrum and in a graphic form of roundness shapes expressed in a polar coordinate system. The procedures described find a practical use during measurements of geometrical deviations of crankshafts realized on the basis of a measuring system with so called flexible support of the measured object. (original abstract)

Słowa kluczowe

EN

Machinery and equipment; Mathematical models

PL

Maszyny i urządzenia; Modele matematyczne

• Czasopismo: Multidisciplinary Aspects of Production Engineering
• Rocznik: 2018
• Tom: 1
• Strony: 185--189

Twórcy

autor

Krzysztof Nozdrzykowski

• Maritime University of Szczecin, Poland

Bibliografia

• Adamczak, S. (1998). Odniesieniowe metody pomiaru zarysów okrągłości części maszyn. Monografie, Studia, Rozprawy. Politechnika Świętokrzyska, Kielce.
• Azirjawi, A. and Basheer, SK. (2018). New design solution for crankshaft. Proceedings of the asme international mechanical engineering congress and exposition, 2017, vol 2.
• Dai, S.P., Gao, L. and Gao, K. (2006). The applications of measurement system for crankshaft. 1st International Symposium on Digital Manufacture, vol. 1-3, pp. 833-836.
• Humienny, Z. (2001). Specyfikacje geometrii wyrobów (GPS) - wykład dla uczelni technicznych. Warszawa: Oficyna Wydawnicza Politechniki Warszawskiej.
• Jakubiec, W. and Malinowski, J. (2004). Metrologia wielkości geometrycznych. Warszawa: WNT.
• Malinowski, J. (1998). Pomiary długości i kąta. Warszawa: Wydawnictwo Szkolne i Pedagogiczne.
• Meaedows, J.D. (1995). Geometric Dimensioning and Tolerancing: Appplications and Techniques for Use in Design, Manufacturing, and Inspection. New York: Marcel Dekker, Inc.
• Nozdrzykowski, K. (2010). The determination and analysis of the total measurement uncertainty of roundness deviation. Scientific journals of the Maritime University of Szczecin, vol. 21, pp. 72-76.
• Nozdrzykowski, K. and Janecki, D. (2014). Comparative studies of reference measurements of cylindrical surface roundness profiles of large machine components. Metrology and Measurement System, vol. XXI, No. 1, pp. 67-76 .
• Sun, J., Wang, J. and Gui, C. (2010). Whole crankshaft beam-element finite-element method for calculating crankshaft deformation and bearing load of an engine. Proceedings of the institution of mechanical engineers part j - Journal Of Engineering Tribology, vol. 224, p. 299-303.
• Quan, W., Wei, J., Zhao, YW., Sun, L.H. and Bianl, X.Y. (2011). Development of an Automatic Optical Measurement System for Engine Crankshaft. 2011 International Conference on Computational Science and Applications, pp. 68-75
• Walczyk, W., Milenin, A. and Pietrzyk, M. (2011). Computer Aided Design of New Forging Technology for Crank Shafts. Steel Research International, vol. 82, pp. 187-194.
• Żebrowska-Łucyk, S. (1979). Wpływ rodzaju okręgu odniesienia na wyniki oceny odchyłki kołowości. Mechanik, Nr. 1, s. 207-210.

Identyfikatory

DOI

10.2478/mape-2018-0024