Literature Review on Emissions from Additive Manufacturing by FDM Method and their Impact on Human Health

• Autorzy: Anna Karwasz , Filip Osiński
• Języki publikacji: EN

Abstrakty

EN

Additive manufacturing in recent years has become one of the fastest growing technologies. The increasing availability of 3D printing devices means that every year more and more devices of this type are found in the homes of ordinary people. Unfortunately, air pollution is formed during the process. Their main types include Ultra Fine Particles (UFP) and Volatile Compounds (VOC). In the event of air flow restriction, these substances can accumulate in the room and then enter the organisms of people staying there. The article presents the main substances that have been identified in various studies available in literature. Health aspects and potential threats related to inhalation of substances contained in dusts and gases generated during the process are shown, taking into account the division into individual types of printing materials. The article also presents the differences between the research results for 3d printing from individual plastics among different authors and describes possible causes of discrepancies.(original abstract)

Słowa kluczowe

EN

Pollution emission; Level of contamination; Natural environment; Health; Production

PL

Emisja zanieczyszczeń; Poziom zanieczyszczenia; Środowisko przyrodnicze; Zdrowie; Produkcja

• Czasopismo: Management and Production Engineering Review
• Rocznik: 2020
• Tom: 11
• Numer: nr 3
• Strony: 65--73

Twórcy

autor

Anna Karwasz

• Poznan University of Technology, Poland

autor

Filip Osiński

• Poznan University of Technology, Poland

Bibliografia

• Bernat Ł., Kroma A., Application of 3D printing casting models for disamatch forming method, Archives of Foundry Engineering, 4, 19, 95-98, 2019.
• Żukowska M., Górski F., Hamrol A., Rating of polymers for low-cost rapid manufacturing of individualized anatomical models used in presurgical planning, Computational and Experimental Simulations in Engineering: Proceedings of ICCE2019, 633-646, Springer 2020.
• Żukowska M., Górski F., Wichniarek R., Kuczko W., Methodology of low cost rapid manufacturing of anatomical models with material imitation of soft tissues, Advances in Science and Technology Research Journal, 13, 4, 120-128, 2019.
• Żukowska M., Górski F., Bromiński G., Rapid manufacturing and virtual prototyping of pre-surgery aids, World Congress on Medical Physics and Biomedical Engineering 2018, 68, 3, 399-406, Springer 2018.
• Górski F., Wichniarek R., Kuczko W., Banaszewski J., Pabiszczak M., Application of low-cost 3D printing for production of CT-based individual surgery supplies, World Congress on Medical Physics and Biomedical Engineering 2018, 249-253, Vol. 1, Springer Singapore 2019.
• Banaszewski J., Pabiszczak M., Pastusiak T., Buczkowska A., Kuczko W., Wichniarek R., Górski F., 3D printed models in mandibular reconstruction with bony free flaps, Journal of Materials Science: Materials in Medicine, 29, 2, 231-236, 2018.
• Attaran M., The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing, Business Horizons, 60, 5, 677-688, 2017.
• https://www.fortunebusinessinsights.com/industry\reports/3d-printing-market-101902,access: 23.07.2020.
• Wojtyła S., Klama P., Baran T., Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon, Journal of Occupational and Environmental Hygiene, 14, 6, 80-85, 2017.
• Z każdym oddechem. Poprawa jakości powietrza w Europie. Europejska Agencja Środowiska, Sygnały EEA 2013, Kopenhaga 2013.
• https:/7www.carbon('oolprinl.com/'docs/'20l8_8_e|ectricity_factors_august_2018_-_online_sources.pdf, access: 23.07.2020.
• Metz N., Diesel particulate matter criteria for evaluation of health effects, 24 Internationa|es Wiener Motorensymposium, Wien 2003.
• Adamkiewicz Ł., Zewnętrzne koszty zdrowotne emisji zanieczyszczeń powietrza z sektora bytowo-komunalnego, Ministerstwo Przedsiębiorczości i Techno|ogii, 2016.
• Zhang Q., Pardo M., Rudich Y., Kap|an-Ashiri I., Wong J.P.S., Davis A.Y., B|ack M.S., Weber R.J., Chemical composition and toxicity of particles emitted from a consumer-level 3D printer using various materials, Environmenta| Science Techno|ogy, 53, 12054-12061, 2019.
• Zhang Q., Wong J.P.S., Davis A.Y., B|ack M.S., Weber R.J., Characterization of particle emissions from consumer fused deposition modeling 3D printers, Aeroso| Science and Techno|ogy, 51, 11, 12751286, 2017, doi: 10.1080/02786826.2017.1342029.
• Rymaniak L., Zio|kowski A., Ga||as D., Particle number and particulate mass emissions of heavy duty vehicles in real operating conditions, InMATEC Web o( Con(erences, vo|. 118, p. 00025, 2017, EDP Sciences.
• Hall S., Pengelly I., Staff J., Plant N., Evans G., Measuring and controlling emissions from polymer filament desktop 3D printers, HSE, 2019, (RR1146).
• Yi J., LeBouf R.F., Du|ing M.G., Nurkiewicz T., Chen B.T., Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature, Indoor Air, 27, 398-408, 2017.
• Gu J., Wensing M., Uhde E., Sa|thammer T., Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer, Environment Internationa|, 123, 476-485, 2019.
• https://pubchem.ncbi.n|m.nih.gov/compound/Irganox-1076

Identyfikatory

DOI

10.24425/mper.2020.134933