PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2020 | 3 | 394--404
Tytuł artykułu

Use of Quality Management Instruments in the Window Production Process

Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Safety and quality management are very important elements of managing production and service processes. It is important not only to manage in itself, but above all to constantly improve processes and constantly strive for excellence. However, continuous improvement of the organization is one of the key principles of quality management, it states that improvement can be obtained from the analysis of existing processes or measurement results. In this paper the level of occupational health and safety in european enterprises providing transport and logistics services in terms of quality management principles. On the basis of the presented results it was found that in large enterprises safety management principles are respected, while in small and medium enterprises the level of safety does not look very promising. An interesting phenomenon was observed in the case of microenterprises (family businesses). Research shows that employees know and adhere to the safety principle, but they do not see too much change in improving the level of safety. (original abstract)
Rocznik
Tom
3
Strony
394--404
Opis fizyczny
Twórcy
  • Czestochowa University of Technology, Poland
  • The University of Maribor, Slovenia
Bibliografia
  • Aburumman, M., Newnam, S., and Fildes, B. (2019). Evaluating the effectiveness of workplace interventions in improving safety culture: A systematic review. Safety Science, 115, pp. 376-392. https://doi.org/10.1016/j.ssci.2019.02.027
  • Aziz, A., Sumantoro, I.B., and Maria, D. (2019). Total Quality Management of Micro, Small and Medium Enterprises (MSMES), and the Impact to Organizational Culture and Performance: Case in Emerging Country. Polish Journal of Management Studies, 19(1), pp. 32-45. https://doi.org/10.17512/pjms.2019.19.1.03
  • Balon, B., and Roszak, M. (2020). Cost-quantitative analysis of non-compliance in the internal logistics process. Production Engineerig Archves, 26(2), pp. 60-66. https://doi.org/10.30657/pea.2020.26.13
  • Bhuiyan, N., and Baghel, A. (2005). An overview of continuous improvement: from the past to the present. Management Decision, 43(5), pp. 761-771. https://doi.org/10.1108/00251740510597761
  • Burt, C.D.B. (2015). Types of New Employee: Experience and Pre-entry Safety Expectations. New Employee Safety. Risk Factors and Management Strategies, pp. 23-40. https://doi.org/10.1007/978-3-319-18684-9
  • Dobránsky, J., Pollák, M., and Doboš, Z. (2019). Assessment of Production Process Capability in the Serial Production of Components for the Automotive Industry. Management Systems in Production Engineering, 27(4), pp. 255-258. https://doi.org/10.1515/mspe-2019-0040
  • Furci, J., and Sunindijo, R.Y. (2020). Impacts of the WHS Act 2011 on safety management in small and medium construction companies. International Journal of Construction Management, 20(3), pp. 196-206. https://doi.org/10.1080/15623599.2018.1484844
  • Grabara, J., Cehlar, M., and Dabylova, M. (2019). Human factor as an important element of success in the implementation of new management solutions. Polish Journal of Management Studies, 20(2), pp. 225-235. https://doi.org/10.17512/pjms.2019.20.2.19
  • Hale, A.R. (2003). Safety management in production. Human Factors and Ergonomics in Manufacturing, 13(3), pp. 185-201. https://doi.org/10.1002/hfm.10040
  • Hale, A.R., Heming, B.H.J., Carthey, J., and Kirwan, B. (1997). Modelling of safety management systems. Safety Science, 26(1-2), pp. 121-140. https://doi.org/10.1016/S0925-7535(97)00034-9
  • Ingaldi, M., and Ulewicz, R. (2018). Evaluation of Quality of the e-Commerce Service. International Journal of Ambient Computing and Intelligence, 9(2), pp. 55-66. https://doi.org/10.4018/IJACI.2018040105
  • Ingaldi, M., and Ulewicz, R. (2020). Problems with the Implementation of Industry 4.0 in Enterprises from the SME Sector. Sustainability, 12(1), 217. https://doi.org/10.3390/su12010217
  • Jagusiak-Kocik, M. (2017). PDCA cycle as apart of continous improvement in a production company - case study. Production Engineering Archives, 14, pp. 19-22. https://doi.org/10.30657/pea.2017.14.05
  • Klimecka-Tatar, D. (2020). Safety management in quality management approach - the ontext of safe working conditions in micro-, small and medium-sized and large enterprises: Education Excellence and Innovation Management: A 2025 Vision to Sustain Economic Development during Global Challenges. Proceedings of the 35th International Business Information Management Association Conference, Seville, Spain.
  • Klimecka-Tatar, D., and Dwornicka, R. (2019). The assembly process stability assessment based on the strength parameters statistical control of complex metal products, pp. 709-714. https://doi.org/10.37904/metal.2019.870
  • Klimecka-Tatar, D., and Ingaldi, M. (2020). How to indicate the areas for improvement in service process - the Knowledge Management and Value Stream Mapping as the crucial elements of the business approach. Revista Gestão and Tecnologia, 20(2), pp. 52-74. https://doi.org/10.20397/2177-6652/2020.v20i2.1878
  • Knop, K. (2019). Evaluation of quality of services provided by transport and logistics operator from pharmaceutical industry for improvement purposes. Transportation Research Procedia, 40, pp. 1080-1087. https://doi.org/10.1016/j.trpro.2019.07.151
  • Kowalik, K., and Klimecka-Tatar, D. (2018). The process approach to service quality management. Production Engineering Archives, 18(18), pp. 31-34. https://doi.org/10.30657/pea.2018.18.05
  • Labajan, R.A.A., and Koomsap, P. (2019). Customer Journey Clue-based Service Failure Prevention. Production Engineering Archives, 25(25), pp. 21-34. https://doi.org/10.30657/pea.2019.25.05
  • Lobanova, A., and Tulenkov, M.V. (2019). Social-and-Economic Order of Organizational Interaction in the Systems of Production Management. Management Systems in Production Engineering, 27(2), pp. 93-99. https://doi.org/10.1515/mspe-2019-0016
  • Mullen, J., Kelloway, E.K., and Teed, M. (2017). Employer safety obligations, transformational leadership and their interactive effects on employee safety performance. Safety Science, 91, pp. 405-412. https://doi.org/10.1016/j.ssci.2016.09.007
  • Niciejewska, M., and Klimecka-Tatar, D. (2018). Health problems among employees in small enterprises as a result of improper OHS management. MATEC Web of Conferences, 183, 1012. https://doi.org/10.1051/matecconf/201818301012
  • Ulewicz, R., Mazur, M., and Novy, F. (2019). The impact of lean tools on the level of occupational safety in metals foundries. METAL 2019 28th International Conference on Metallurgy and Materials, Conference Proceedings, 2013-2019. https://doi.org/10.37904/metal.2019.992
  • Ulewicz, R., and Nový, F. (2019). Quality management systems in special processes. Transportation Research Procedia, 40, pp. 113-118. https://doi.org/10.1016/j.trpro.2019.07.019
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.ekon-element-000171611175

Zgłoszenie zostało wysłane

Zgłoszenie zostało wysłane

Musisz być zalogowany aby pisać komentarze.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.