Application of Selected Reverse Engineering Procedures Based on Specific Requirements

• Autorzy: Mária Hrčková , Pavol Koleda
• Języki publikacji: EN

Abstrakty

EN

The paper describes a solution of reverse engineering tasks using the equipment of the laboratory of the Technical University in Zvolen. The first task was linked to evaluation of a wear rate of the tool used to for mulching and elimination of unwanted wood or weed vegetation. The obtained data will be used as a base line for determination of the time interval for the tool replacement. We developed a prototype of components and their drawing documentation for a single-purpose machine for cutting barley. We created the 3D model using the method of photogrammetry. The finished drawing documentation and prototypes were handed over to the company KRUP. Finally, we identified the most suitable procedures for creating a model of a part with a complex shape. We tested the techniques of editing the point cloud processing, as well as of smoothing the surfaces and automating the creation of partial geometric elements of the model. Based on the properties of the component, which is the starting point of the entire reverse engineering process and from the achieved results, we set recommendations for the selection of appropriate procedures. (original abstract)

Słowa kluczowe

EN

Ergonomics; Production of toys; Industrial design; Children; Design process

PL

Ergonomia; Produkcja zabawek; Wzornictwo przemysłowe; Dzieci; Proces projektowania

• Czasopismo: Multidisciplinary Aspects of Production Engineering
• Rocznik: 2021
• Tom: 4
• Strony: 75--85

Twórcy

autor

Mária Hrčková

• echnical University in Zvolen, Slovak Republic

autor

Pavol Koleda

• Technical University in Zvolen, Slovak Republic

Bibliografia

• Anwer, N. and Mathieu, L. (2016) From reverse engineering to shape engineering in mechanical design, CIRP Annals - Manufacturing Technology, Volume 65, Issue 1, 2016, pp. 165-168, ISSN 0007-8506, http://dx.doi.org/10.1016/j.cirp.2016.04.052.
• Babjak, Š (2006) Plánovanie reverzného inžinierstva v procese rýchleho vývoja výrobkov II, Transfer inovácií, Košice, issue 9, pp. 62-64, ISBN 80-8073-701-0
• Čmarada, M. and Hrčková M. (2012) Trojrozmerné skenovacie systémy, In: Strojárstvo: mesačník o strojárstve, issue 4, pp. 6-9, ISSN 1335-2938.
• Durna, A., Fries, J., Hrabovsky, L., Sliva, A., Zarnovsky J. (2020) Research and Development of Laser Engraving and Material Cutting Machine From 3D Printer. Management Systems in Production Engineering. Volume 28, issue 1. pp. 47-52. DOI: 10.2478/mspe-2020-0008
• Koelman, H. J. (2010) Application of a photogrammetry-based system to measure and re-engineer ship hulls and ship parts: An industrial practices-based report, Computer-Aided Design, Volume 42, Issue 8, pp. 731-743. https://doi.org/10.1016/j.cad.2010.02.005.
• Kassai., M. (2019) Využitie techník reverzného inžinierstva pri rekonštrukcii tvarovo zložitej súčiastky, Diplomová práca, Zvolen: Technická univerzita vo Zvolene. 2019. 83 s.
• Kumar, A., Jain, P. K. and Pathak, P. M. (2013) Reverse Engineering in Product Manufacturing: An Overview. DAAAM International Scientific Book, pp. 665-679.
• Li, L., Schemenauer, X., Peng, Y. and Gu, P. (2002). A reverse engineering system for rapid manufacturing of complex objects, Robotics and Computer-Integrated Manufacturing, Volume 18, Issue 1, 2002, pp. 53-67, ISSN 0736-5845, http://dx.doi.org/10.1016/S0736-5845(01)00026-6.
• Paulic, M., Irgolic, T., Balic, J., Cus, F., Cupar, A., Brajlih, T. and Drstvensek, I. (2014). Reverse Engineering of Parts with Optical Scanning and Additive Manufacturing, Procedia Engineering, Volume 69, 2014, pp. 795-803, ISSN 1877-7058, http://dx.doi.org/10.1016/j.proeng.2014.03.056
• Raja, V. and Fernandes, K. (2008) Reverse Engineering: An Industrial Perspective. Springer-Verlag London 2008. 242 s. ISBN 978-1-84628-855-5.
• Sókol, K. and Cekus, D. (2017) Reverse Engineering as a Solution in Parts Restoration Process, Procedia Engineering, Volume 177, pp. 210-217. https://doi.org/10.1016/j.proeng.2017.02.191.
• Valerga, A. P., Batista, M., Bienvenido, R., Fernández-Vidal, S. R., Wendt, C. and Marcos, M. (2015) Reverse Engineering based Methodology for Modelling Cutting Tools, Procedia Engineering, Volume 132, pp. 1144-1151. https://doi.org/10.1016/j.proeng.2015.12.607.
• Várady, T., Martin, R. R. and Cox, J. (1997). Reverse engineering of geometric models - an introduction, Computer-Aided Design, Volume 29, Issue 4, 1997, s. 255-268, ISSN 0010-4485, http://dx.doi.org/10.1016/S0010-4485(96)00054-1.
• Wang, W. (2010) Reverse Engineering Technology of Reinvention. CRC Press Taylor & Francis Group, an Informa business Boca Raton 2010. 357 p. ISBN 978-1-4398-0630-2. https://doi.org/10.1201/EBK1439806302.
• Zivkovic, S., Cerce, L., Kostic, J., Majstorovic, V., Kramar, D. (2018) Reverse Engineering of Turbine Blades Kaplan's type for Small Hydroelectric Power Station, The 15th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2018. Milan, Italy, Volume 75, pp. 379-384, https://doi.org/10.1016/j.procir.2018.04.037.

Identyfikatory

DOI

10.2478/mape-2021-0007