Problems of Quality Assurance and Selection of Control Criteria in Laser Cutting Operations of Wood and Wood-Like Materials

• Autorzy: Aleksandra Sobolewska , Barbara Ciecińska
• Języki publikacji: EN

Abstrakty

EN

The paper presents the problem of quality assurance of the laser cutting process of wood and wood-like materials and the selection of optimal processing conditions with respect to the required evaluation criteria. An experiment conducted to identify processing difficulties and potential causes of defects is described. Samples of three materials: pine wood, hardwood plywood and mixed wood HDF with a thickness of 4 mm were cut with a CO2 laser and visually inspected and the width of the slit was measured. It was found that there was a relationship between the laser operating parameters and the obtained slit width. The higher the cutting speed, the narrower the slit. The obtained numerical results allowed to formulate technological guidelines on the selection of laser parameters depending on the material. In turn, based on the visual inspection, defects depending on the material properties were identified. An example of a non-conformity identification manual was developed, which includes illustrations to enable comparative analysis in production. It was found that in the studied process, different criteria can be adopted to qualify a product as compliant or non-compliant. A dilemma may then arise as to which criterion is more important. Therefore, a quality evaluation criteria verification sheet was proposed. Furthermore, due to the fact that the success of the laser cutting process is also dependent on other factors, a list of risks to the process was made. (original abstract)

Słowa kluczowe

EN

Wood industry; Materials science

PL

Przemysł drzewny; Materiałoznawstwo

• Czasopismo: Multidisciplinary Aspects of Production Engineering
• Rocznik: 2021
• Tom: 4
• Strony: 142--152

Twórcy

autor

Aleksandra Sobolewska

• Rzeszow University of Technology, Poland

autor

Barbara Ciecińska

• Rzeszow University of Technology, Poland

Bibliografia

• Bugdol, M. (2018) System zarządzania jakością według normy ISO 9001:2015. Gliwice: HELION
• Gaczek, M. [on-line]. Podstawowe materiały i wyroby budowlane. Drewno i tworzywa drzewne. Available at: http://www.ikb.poznan.pl/mariusz.gaczek/pb02_v01.pdf; [Accessed 9 June 2021].
• Hamrol, A., Mantura, W. (2006) Zarządzanie jakością. Teoria i praktyka. Warszawa: PWN.
• Hamrol, A. (2017) Zarządzanie i inżynieria jakości. Warszawa: PWN Jakość [on-line]. Available at: https://sjp.pwn.pl/sjp/jakosc; [Accessed 9 June 2021].
• EN-ISO 9001:2015 Quality Management Systems - Requirements
• Pacana, A., Ingaldi, M., Czajkowska, A. (2017) Projektowanie i wdrażanie sformalizowanych systemów zarządzania. Rzeszów: Oficyna Wydawnicza Politechniki Rzeszowskiej
• Ploter [on-line] Available at: https://atmsolutions.pl/produkt/527/Ploter_Laserowy_CO2_ATMS_PRO1390 [Accessed 9 June 2021].
• Sałaciński, T. (2016) Inżynieria jakości w technikach wytwarzania. Warszawa, Oficyna Wydawnicza Politechniki Warszawskiej
• Sobolewska, A. (2021) Projekt procedury kontroli jakości wycinania laserowego wyrobów drewnianych. Diploma thesis, Rzeszów University of Technology.

Identyfikatory

DOI

10.2478/mape-2021-0013