Experimental Assessment if Changes in Structural Steel Composition by Progressive Technology Cutting

• Autorzy: Jozef Mascenik
• Języki publikacji: EN

Abstrakty

EN

The submitted paper deals with the issue of change in structure, hardness and thermally affected zone of the samples of a toothed wheel part produced by technology of cutting by plasma, laser and water jet. The cutting process by laser and plasma technology causes intensive thermal affection of material and change in structure and microhardness in the cutting area referred to as thermally affected zone. The paper describes three material cutting technologies of the toothed wheel part. The experimental part contains description of experimental sample preparation, its hardness measurement and examination of structure along with further evaluation through graphs and photo documentation of structures. (original abstract)

Słowa kluczowe

EN

Steel industry; Steel production; Materials science

PL

Przemysł stalowy; Produkcja stali; Materiałoznawstwo

• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2021
• Tom: 29
• Numer: nr 4
• Strony: 266--273

Twórcy

autor

Jozef Mascenik

• Technical University of Kosice

Bibliografia

• Bicejova, L., Pavlenko, S., Mascenik, J.: Abrasive Granularity Impact on Water Jet Technology Head Vibrations During Cutting Steel, In: Applied Mechanics and Materials: ICMSMA 2013: International Conference on Mechatronic Systems and Materials Application: Guanghou, China, 26-27 June 2013. Vol. 389 (2013), pp. 304-309. ISBN 978-303785815-8. ISSN 1660-9336.
• Bicejova, L., Pavlenko, S., Mascenik, J.: Measuring, processing and evaluating of technology head water jet vibration signal, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 205-211. ISBN 978-3-03835-629-5. ISSN 1013-9826.10.4028/www.scientific.net/KEM.669.205
• Bicejova, L., Pavlenko, S., Mascenik, J.: The Influence of Technology Head Shift Speed, Abrasive Kind and Granularity on Technology Head Vibration during Hard-to-Machine Material Cutting, In: Advanced Materials Research: ICMPMT 2014. Vol. 1061-1062 (2015), pp. 507-510. ISBN 978-3-03835-349-2.
• Coranic, T., Gaspar, S., Pasko, J.: Structural modification impact analysis of selected components of shielding equipment using rapid prototyping technology, In: MM Science Journal. Vol. 2018, no. March (2018), pp. 2183-2187. ISSN 1803-1269.
• Gaspar, S., Coranic, T., Pasko, J.: Influence of die casting factors and of hardening temperature upon mechanical properties of a die cast, In: MM Science Journal. Prague (Czech Republic): MM Publishing no. December (2018), pp. 2639-2642 [print, online]. ISSN 1803-1269.
• Gaspar, S., Pasko, J.: Analysis of influence of pressing speed, of melt temperature and of casting position in a mold upon ultimate tensile strength Rm of die casting from aluminium, In: Advanced Materials Research: 2nd International Conference on Manufacturing 2014, February 9-10, 2014, Singapore. Vol. 909 (2014), pp. 3-7. ISBN 978-303835059-0. ISSN 1022-6680.
• Jechj, J.: Heat treatment of steel. Brno, Czech Republic, 1983, 392 p. ISBN 04-408-83.
• Krajny, Z.: Water Jet in practice. Bratislava, Slovakia, EPOS, 1998, ISBN 80-8057-091-4.
• Krehel, R., Pavlenko, S., Mascenik, J.: Application and verification properties of the thermal process model, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 400-408. ISBN 978-3-03835-629-5. ISSN 1013-9826.10.4028/www.scientific.net/KEM.669.400
• Krenicky, T., Olejarova, S.: Manufacturing technologies: materials, operation and application, Zurich: Trans Tech Publications, 2017. 155 p. ISBN 978-3-0357-1196-7.
• Krenicky, T., Servatka, M., Gaspar, S., Mascenik, J: Abrasive Water Jet Cutting of Hardox Steels-Quality Investigation, In: Processes. - Bazilej (Switzerland): Multidisciplinary Digital Publishing Institute, no. 8/12 (2020), pp. 1-12 [online]. ISSN 2227-9717.
• Kuznetsov, E., Nahornyi, V., Krenicky, T.: Gas Flow Simulation in the Working Gap of Impulse Gas-Barrier Face Seal, In: Management Systems in Production Engineering. Warszawa (Poland): STE. Group, no. 28/4 (2020), pp. 298-303 [print, online]. ISSN 2299-0461.
• Majernik, J., Gaspar, S., Gryc, K., Socha, L.: Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Mechanical Properties of Casting. Manufacturing technology, Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, roč. 18, č. 3, pp. 439-443. ISSN 1213-2489.
• Mascenik, J.: Design of a material cutting device with option of length adjustment of wooden cutting substance, In: MM Science Journal. Vol. 2017, no. December (2017), pp. 1919-1923. ISSN 1803-1269.
• Mascenik, J.: Experimental determination of cutting speed influence on cutting surface character in material laser cutting, In: MM Science Journal. Vol. 2016, no. September (2016), pp. 960-963. ISSN 1803-1269.
• Mascenik, J., Halko, J., Pavlenko, S.: Measurement of surface roughness of gears made by unconventional technologies, In: SBW 2009: Robotization and automation in welding and other techniques: 5. international scientific-professional conference: conference proceedings: Slavonski Brod, 11-13.11.2009. Slavonski Brod: Mechanical Engineering Faculty, 2009 P. 141-144. ISBN 978-953-6048-51-9.
• Mascenik, J., Pavlenko, S., Bicejova, L.: Plasma gear manufacturing thermal aspects, In: Advanced Materials Research: ICMPMT 2014. Vol. 1061-1062 (2015), pp. 592-595. ISBN 978-3-03835-349-2.
• Mascenik, J., Pavlenko, S.: Determination of stress and deformation during laser welding of aluminium alloys with the PC support, In: MM Science Journal. Prague (Česko): MM Publishing 2020, no. November (2020), pp. 4104-4107 [print, online]. ISSN 1803-1269.
• Mascenik, J., Pavlenko, S.: Effective Use of Technology Flowdrill in Production Engineering, In: Advanced Materials Research: AMSE 2014. Vol. 1064 (2015), pp. 171-174. ISBN 978-3-03835-346-1.
• Mascenik, J., Pavlenko, S.: Gear production using nonconventional technologies, In: Technika i technologii: innovacii i kačestvo. - Baranoviči: RIO, 2007 pp. 55-57. ISBN 9789854980928.
• Olejarova, S., Krenicky, T.: Analysis of the effects of factors in relation to vibration of technological head during the splitting of construction steels through hydro-abrasive splitting, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 216-219. ISSN 1013-9826.
• Simkulet, V., Mascenik, J., Mitalova, Z., Michalik, P.: Study of microstructural characteristic of ENS233J2G3 Steel after Plasma, Laser and WAJ cutting, In: Methods and means of machining materials: the work of the Center for Advanced Machining Methods. 2012. Presov: FVT TU, 2012 pp. 101-107. ISBN 978-80-553-1182-1.
• Straka, L., Hasova, S.: Prediction of the heat-affected zone of tool steel EN X37CrMoV5-1 after die-sinking electrical discharge machining, In: Proceedings of the institution of mechanical engineers part B, Journal of engineering manufacture. Vol. 232, no. 8 (2018), pp. 1395-1406. ISSN 0954-4054.
• https://www.machinemfg.com/laser-cutting-quality-control/
• https://www.jasic.co.uk/post/guide-to-plasma-cutting

Identyfikatory

DOI

10.2478/mspe-2021-0033