Application of Single Minute Exchange of Die in Production Process Improvement

• Autorzy: Monika Konieczna , Beata Mrugalska , Magdalena Wyrwicka
• Języki publikacji: EN

Abstrakty

EN

This paper concerns Single Minute Exchange of Die (SMED) which is one of lean tools applied for reduction of change over time on machines. It is a review paper on the basis of the literature collected from three electronic databases: Elsevier Science, Springer and E-resources from library of Poznan University of Technology. The retrieved articles were screened following the inclusion/exclusion criteria. After applying the literature selection criteria 40 articles published between the years 2000-2017 were chosen. These papers were classified on the basis of year of publication, journal title, main issue, tools and methods, type and also location. Their analysis revealed that SMED was applied in various range of enterprises in order to reduce time of setups and eliminate unnecessary activities which have no value for the process. It was also a useful tool for production process improvement as it may support lean tools in order to increase the process efficiency. The vast majority of papers was published in European countries. However, the increasing number of publications in recent years may suggest the increase of interest in this subject in different areas. (original abstract)

Słowa kluczowe

EN

SMED method; Lean production; Lean management; Literature review; Case study

PL

Metoda SMED (Single Minute Exchange of Die); Odchudzanie produkcji; Odchudzone zarządzanie; Przegląd literatury; Studium przypadku

• Czasopismo: Logistyka i Transport
• Rocznik: 2018
• Tom: 39
• Strony: 31--37

Twórcy

autor

Monika Konieczna

• Poznan University of Technology, Poland

autor

Beata Mrugalska

• Poznan University of Technology, Poland

autor

Magdalena Wyrwicka

• Poznan University of Technology, Poland

Bibliografia

• Ahmad R., Soberi M., Changeover process improvement based on modified SMED method and other process improvement tools application: an improvement project of 5-axis CNC machine operation in advanced composite manufacturing industry, Int J Adv Manuf Technol 94, 2017, 433-450.
• Alhuraish I., Robledo C., Kobi A., The Effective of Lean Manufacturing and Six Sigma Implementation, 6th IESM Conference, October 2015, Seville, Spain, 2015.
• Azizi A., Manoharan T., Designing a Future Value Stream Mapping to Reduce Lead Time using SMED-A Case Study, Procedia Manufacturing , 2, (2015) , 153 - 158.
• Brito M., et al. 2017, Combining SMED methodology and ergonomics for reduction of setup in a turning production area. Procedia Manufacturing 13 (2017) 1112-1119.
• Castro A., Silva M., Silva F., Designing a robotic welding cell for bus body frame using a sustainable way, Procedia Manufacturing 11 (2017) 207 - 214.
• Chen S., et al. 2017, The Design of JMP/SAP Based Six Sigma Management System and its Application in SMED. Procedia Engineering 174 (2017) 416 - 424.
• Desai M., Rawani A., Productivity Improvement of Shaping Division of an automobile industry by using single minute exchange of die (SMED) methodology, ARPN Journal of Engineering and Applied Sciences, 12(8) 2017.
• Dhake R., Rajebhosale V., Setup Time Reduction On Solder Paste Printing Machine - A Case Study, International Journal of Lean Thinking, 4, 1 (June 2015).
• Diaz-Reza J., et al., The Effect of SMED on Benefits Gained in Maquiladora Industry, Sustainability 2016, 8, 1237; doi:10.3390/su8121237.
• Djekic I., et al, Lean Manufacturing Effects in a Serbian Confectionery Company - Case Study, Organizacija, Volume 47 Special Theme: Application of Quality Management, 2014.
• Dombrowski U. et al, Impact analyses of lean production systems, 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016), Procedia CIRP 57 (2016) 607 - 612.
• Ferradas P. G., Dalonitis K., Improving changeover time: a tailored SMED approach for welding cells. Procedia CIRP 7 (2013) 598 - 603.
• Filla Jan, The Single Minute Exchange of Die Methodology in a High-Mix Processing Line, Journal of Competitiveness, 8(2), 59 - 69, 2016.
• Grzybowska K., Gajdzik B. Optimisation of equipment setup processes in enterprises. Journal Metalurgija, 51 (2012) 4, 563-566.
• Hashemzadeh G., Khoshtarkib M., Hajizadeh S., Identification and weighting factors influencing the establishment of a single minute exchange of dies in plastic injection industry using VIKOR and Shannon Entropy. Management Science Letters 4 (2014) 977-984.
• Hodge G., et al, Adapting lean manufacturing principles to the textile industry, Production Planning & Control, 22(3), 2011, 237-247.
• Jaroszewicz J., et al., Reduction of changeover time in a CNC milling machine using Erowa zeroing system based on the example of Samasz company, Białystok, Zeszyty Naukowe Politechniki Śląskiej, Organizacja I Zarządzanie z. 100, 2017.
• Jezierski J., Janerka K., The lean manufacturing tools in Polish foundries, Archives of Metallurgy and Materials, Volume 58, 2013.
• Koch T., Jak stosować metody. Lean Manufacturing (Oszczędnego Wytwarzania) do wprowadzania innowacji. W: E-narzędzia i technologie generatywne jako szybka ścieżka do innowacji, Materiały konferencyjne, Agencja Rozwoju Przemysłu, Warszawa 2011.
• Kowal S., Knop K., Wykorzystanie metody SMED do poprawy efektywności pracy stanowiska wytłaczania rurek gładkich, Zeszyty Naukowe, 2(7) 2017, 94-105.
• Lipiak J., Methodology for Assessing the Factors Affecting the Quality and Efficiency of Flexographic Printing Process. Procedia Engineering 182 (2017) 403 - 411.
• Lozano et al., Integration of the SMED for the improvement of the supply chain management of spare parts in the food sector, Agric. Econ. - Czech, 63, 2017 (8): 370-379.
• Lucherini F., Rapaccini M., Exploring the Impact of Lean Manufacturing on Flexibility in SMEs, Journal of Industrial Engineering and Management JIEM, 2017 - 10(5): 919-945 - Online.
• McIntosh R. et al, Changeover Improvement: Reinterpreting Shingo's "SMED" Methodology, IEEE Transactions of Engineering Management, vol. 54, no. 1, 1 February 2007.
• Mendez R. et al., A case study: SMED & JIT methodologies to develop continuous flow of stamped parts into AC disconnect assembly line in Schneider Electric Tlaxcala Plant, IFAC Conference Paper Archive, 2015.
• Migza M., Bogacz P., Possibility of using Lean Management tools in underground mining companies in Poland, Przegląd Górniczy, 2015.
• Moxham C., Greatbanks R., Prerequisites for the implementation of the SMED methodology, International Journal of Quality & Reliability Management, 18(4), 2001, 404-414.
• Moreira A., Garcez P. Implementation of the Single Minute Exchange of Die (SMED) methodology in small to medium-sized enterprises: A Portuguese case study. International Journal of Management, 30(1), (2013) 66-87.
• Mrugalska B., Zasada B., Wyrwicka M.K., Preventive Approach to Machinery and Equipment Maintenance in Manufacturing Companies. In: Advances in Manufacturing, Production Management and Process Control. Karwowski W., Trzcieliński S., Mrugalska B., Di Nicolantonio M., Rossi E., (eds.), AHFE 2018, Advances in Intelligent Systems and Computing 793, Springer International Publishing AG, 2019, 540-548.
• Mustafa K., Cheng K., Improving production changeovers and the optimization: A simulation based virtual process approach and its application perspectives, Procedia Manufacturing, 11 (2017) 2042 - 2050.
• Norzaimi M., Sollahuddin M., The Effectiveness of the Single Minute Exchange of Die (SMED) Technique for the Productivity Improvement, International Journal of Sciences: Basic and Applied Research, 2015.
• Nowakowska-Grunt J., Sałek R., SMED method analysis as a factor supporting enterprise management, Advanced Logistic Systems, Częstochowa University of Technology.
• Oliveira J., Sa J., Fernandes A., Continuous improvement through "Lean Tools": An application in a mechanical company, Procedia Manufacturing 13, 2017, 1082-1089.
• Pallavi A., Reduction In Setup Time By Single Minute Exchange Of Dies (SMED) Methodology, International Journal of Scientific & Technology Research, 5(6), 2016.
• Pinjar M., Shivakumar S., Patil G., Productivity Improvement through Single Minute Exchange of Die (SMED) Technique, International Journal of Scientific and Research Publications, 5(7), 2015.
• Peter O., Extending the technology envelope of equipment fungibility with Single Minute Exchange Die (SMED) Novel Solution, 34th International Electronic Manufacturing Technology Conference, 2010
• Roriz C., Nunes E., Sousa S., Application of Lean Production Principles and Tools for Quality Improvement of Production Processes in a Carton Company, Procedia Manufacturing 11, 2017 1069 - 1076
• Robinson, Al.. Modern approaches to manufacturing improvement: The Shingo system. Routledge, 2017.
• Rosa C. et al., 2017, SMED methodology: The reduction of setup times for Steel Wire-Rope assembly lines in automotive industry, Procedia Manufacturing 13 (2017) 1034-1042.
• Sabadka D., Molnar V., Fedorko G., The use of lean manufacturing techniques - SMED Analysis to optimization of the production process, Advances in Science and Technology Research Journal, 11(3), 2017, 187-195.
• Shingo S. A revolution in manufacturing: the SMED system. Portland - Oregon: Productivity Press; 1985.
• Shingo, S. The sayings of Shigeo Shingo: Key strategies for plant improvement. Routledge, 2017.
• Simoes A., Temera A., Improving setup time in a Press Line - Application of the SMED methodology, Management and Control of Production Logistic, 2010.
• Skotnicka-Zasadzień B., Masoń P., Improving technologicla objects using the SMED method, Zeszyty Naukowe Politechniki Śląskiej, Organizacja i Zarządzanie z. 87.
• Teran-Somohano A., Smith A., A Setup Reduction Methodology from Lean Manufacturing for Development of Meta-heuristic Algorithms, 2013 IEEE Congress on Evolutionary Computation June 20-23, Cancún, México.
• Ulutas B., An application of SMED Methodology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 5(7), 2011.
• Władysiak R., Reengineering of Permanent Mould Casting with Lean Manufacturing Methods, Archives of Foundry Engineering, 2007.
• Womack J, Jones D, Ross D., The machine that changed the world. New York: Macmillan, 1990.
• www. lean.org.pl/smed-czyli-skracanie-czasowprzezbrojen-maszyn-i-urzadzen. Accessed 03.04.2018.
• Wyrwicka M.K., Mrugalska B., Mirages of Lean Manufacturing in Practice, Procedia Engineering 182, 2017, 780 - 785.
• Wyrwicka M.K., Zasada B., Zastosowania koncepcji lean celem poprawy efektywności przedsiębiorstw produkcyjnych, Gospodarka Materiałowa i Logistyka, nr 6 (CD), 2014, 78-83.

Identyfikatory

DOI

10.26411/83-1734-2015-3-39-7-18