Application of Methods of Decentralized Systems in Management in Lean Manufacturing

• Autorzy: Tibor Krenický , Kostiantyn Dyadyura , Dmitriy Dmitrishin , Sergii Grybniak , Igor Prokopovich
• Języki publikacji: EN

Abstrakty

EN

The emergence and subsequent popularization of lean manufacturing have become one of the most significant for improving the efficiency and productivity of operations. The use of lean manufacturing tools and methods leads to the elimination of waste in the organization. Traditional information systems that allow organizations to share information about resources while managing process performance and traceability have a number of disadvantages such as security, interoperability, and transparency. Currently, distributed ledger technology (block- chain) is widely used for this purpose. This article presents a study of decentralized management of the implementation of a distributed ledger infrastructure, which is selected based on the characteristics of the production system. This study proposes a framework that analyzes lean production methods using simulation and data envelopment analysis (DEA) to accommodate the underlying multi-objective decision-making problem. The current study examines the impact of the simultaneous application of RCA technology, lean manufacturing methods, and distributed ledger technology on the total time, costs, and time of production processes. (original abstract)

Słowa kluczowe

EN

Lean production; Business ecosystem; Product life cycle

PL

Odchudzanie produkcji; Ekosystem biznesowy; Cykl życia produktu

• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2023
• Tom: 31
• Numer: nr 4
• Strony: 427--433

Twórcy

autor

Tibor Krenický

• Technical University of Kosice

autor

Kostiantyn Dyadyura

• Odessa National Polytechnic University

autor

Dmitriy Dmitrishin

• Odessa National Polytechnic University

autor

Sergii Grybniak

• Odessa National Polytechnic University

autor

Igor Prokopovich

• Odessa National Polytechnic University

Bibliografia

• [1] A. Raja Santhi, P. Muthuswamy. "Industry 5.0 or industry 4.0S? Introduction to industry 4.0 and a peek into the prospective industry 5.0 technologies." Int J Interact Des Manuf, vol. 17, pp. 947-979, 2023.
• [2] M.V. Pereira Pessôa, J.M. Jauregui Becker. "Smart design engineering: a literature review of the impact of the 4th industrial revolution on product design and development." Res Eng Design., vol. 31, pp. 175-195, 2020.
• [3] A.P. Menon, V. Lahoti, N. Gunreddy, et al. "Quality control tools and digitalization of real-time data in sustainable manufacturing." Int J Interact Des Manuf, 2022.
• [4] Z. Huang, C. Jowers, D. Kent, et al. "The implementation of Industry 4.0 in manufacturing: from lean manufacturing to product design." Int J Adv Manuf Technol, vol. 121, pp. 3351-3367, 2022.
• [5] T. Ding, G. Yan, Z. Zhou, et al. "A novel manufacturing service model transformation method based on product lifecycle." Peer-to-Peer Netw. Appl., vol. 15, pp. 1638-1652, 2022.
• [6] X. Niu, M. Wang, S. Qin. "Product design lifecycle information model (PDLIM)." Int J Adv Manuf Technol., vol. 118, pp. 2311-2337, 2022.
• [7] B. Anthony. "Deployment of distributed ledger and decentralized technology for transition to smart industries." Environ Syst Decis., vol. 43, pp. 298-319, 2023.
• [8] S. Kumar, W.M. Lim, U. Sivarajah, et al. "Artificial Intelligence and Blockchain Integration in Business: Trends from a Bibliometric-Content Analysis." Inf Syst Front., vol. 25, pp. 871-896, 2023.
• [9] C. Zhou, L. Qi, X. Liu, et al. "MRO Configuration Management for Complex Products." J. Syst. Sci. Syst. Eng., vol. 31, pp. 359-380, 2022.
• [10] L. Wang, Z. Liu, A. Liu, et al. "Artificial intelligence in product lifecycle management." Int J Adv Manuf Technol, vol. 114, pp. 771-796, 2021.
• [11] P. Kurdel, J. Labun, F. Adamcik. "The Estimation Method of the Characteristics of an Aircraft with Electromechanic Analogue." Nase More, vol. 61, No. 1-2, pp. 18-21, 2014.
• [12] N. Cubonova, T. Dodok, Z. Sagova. "Optimisation of the Machining Process Using Genetic Algorithm." Scientific J. of Silesian Uni. of Technology - series Transport, vol. 104, pp. 15-25, 2019.
• [13] S. Ren, Y. Zhang, T. Sakao, et al. "An Advanced Operation Mode with Product-Service System Using Lifecycle Big Data and Deep Learning." Int. J. of Precis. Eng. and Manuf.- Green Tech., vol. 9, pp. 287-303, 2022.
• 14] K. Dyadyura, K.L. Hrebenyk, T. Krenicky, T. Zaborowski. "Modeling of the manufacturing systems state in the conditions of the lean production." MM Science Journal, pp. 4408-4413, 2021.
• [15] S.Y. Lin, L. Zhang, J. Li, et al. "A survey of application research based on blockchain smart contract." Wireless Netw., vol. 28, pp. 635-690, 2022.
• [16] X. Fan, Q. Chai, Z. Zhong. "Multav: A multi-chain token backed voting framework for decentralized blockchain governance." International Conference on Blockchain, 2020, pp. 33-47.
• [17] S.B. Rane, Y.A.M. Narvel. "Data-driven decision making with Blockchain-IoT integrated architecture: a project resource management agility perspective of Industry 4.0." Int J Syst Assur Eng Manag, vol. 13, pp. 1005-1023, 2022.
• [18] P. Jagwani, V.B. Singh, N. Agrawal, et al. "Blockchain technology and software engineering practices: a systematic review of literature using topic modelling approach." Int J Syst Assur Eng Manag, vol. 14 (suppl. 1), pp. 1-17, 2023.
• [19] M. Blatnický, J. Dižo, M. Sága, J. Gerlici, E. Kuba. "Design of a Mechanical Part of an Automated Platform for Oblique Manipulation." Applied Sciences, vol. 10, no. 23, 8467, 2020.
• [20] T. Dodok, N. Čuboňová, I. Kuric. "Workshop Programming as Part of Technological Preparation of Production." Ad- vances in Science and Technology Research Journal, vol. 11. pp. 111-116, 2017.
• [21] M. Saga, R. Bednar, M. Vasko. "Contribution to Modal and Spectral Interval Finite Element Analysis." Vibration Problems ICOVP 2011, vol. 139, pp. 269-274, 2011.
• [22] J. Jurko, A. Panda, M. Gajdoš, T. Zaborowski. "Verification of cutting zone machinability during the turning of a new austenitic stainless steel". Advances in Computer Science and Education Applications, vol. 2011, pp. 338-345, 2011.
• [23] J. Jurko, M. Džupon, A. Panda and J. Zajac. "Study influence of plastic deformation a new extra low carbon stainless steels XCr17Ni7MoTiN under the surface finish when drilling". Advanced Materials Research, vol. 538-541, pp. 1312-1315, 2012.
• [24] J. Jurko, A. Panda and M. Behún. "Prediction of a new form of the cutting tool according to achieve the desired surface quality". Applied Mechanics and Materials, vol. 268, no. 1, pp. 473-476, 2013.
• [25] A. Panda, J. Duplák, J. Jurko and M. Behún. "Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6". Advanced Materials Research, vol. 340, pp. 30-33, 2011.
• [26] A. Panda, J. Duplák, J. Jurko and M. Behún. "New experimental expression of durability dependence for ceramic cutting tool". Applied Mechanics and Materials, vol. 275-277, p. 2230-2236, 2013.
• [27] A. Panda, J. Duplák, J. Jurko and I. Pandová. "Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016". Applied Mechanics and Materials, vol. 415, pp. 610-613, 2013.
• [28] A. Panda, J. Duplák and J. Jurko. "Analytical expression of T-vc dependence in standard ISO 3685 for cutting ceramic". Key Engineering Materials, vol. 480-481, pp. 317- 322, 2011.
• [29] V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova, T. Zaborowski. "Enhancing efficiency by implementation of integrated management system in order to align organisational culture and daily practice." Management Systems in Production Engineering, vol. 28, no. 4, pp. 304-311, 2020.
• [30] J. Valíček, M. Harničárová, A. Panda, et al. "Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface". Machining, joining and modif. of adv. materials, vol. 61, pp. 111-120, 2016.
• [31] A. Sedlackova, P. Kurdel, J. Labun. "Simulation of Unmanned Aircraft Vehicle Flight Precision." LOGI 2019 - Horizons of Autonomous Mobility in Europe, vol. 44, pp. 313-320, 2020.
• [32] T. Zaborowski. Ekowytwarzanie. Gorzow, 2007, 100 p.
• [33] V. Mullet, P. Sondi, E. Ramat. "A blockchain-based confidentiality-preserving approach to traceability in Industry 4.0." Int J Adv Manuf Technol., vol. 124, pp. 1297-1320, 2023.
• [34] Q. Zhang, B. Liao, S. Yang. "Application of blockchain in the field of intelligent manufacturing: Theoretical basis, realistic plights, and development suggestions." Front. Eng. Manag., vol. 7, pp. 578-591, 2020.
• [35] L. Wang, Z. Liu, A. Liu, A., et al. "Artificial intelligence in product lifecycle management." Int J Adv Manuf Technol., vol. 114, pp. 771-796, 2021.
• [36] S. Chen, X. Cai, X. Wang, et al. "Blockchain applications in PLM towards smart manufacturing." Int J Adv Manuf Technol., vol. 118, pp. 2669-2683, 2022.
• [37] W. Liu, X. Liu, X. Shi, et al. "Collaborative adoption of blockchain technology: A supply chain contract perspective." Front. Eng. Manag., vol. 10, pp. 121-142, 2023.
• [38] R. Sonmez, F.Ö. Sönmez, S. Ahmadisheykhsarmast. "Blockchain in project management: a systematic review of use cases and a design decision framework." J Ambient Intell Human Comput, 2021.
• [39] H. Liu, Y. Chen. "Using blockchain technology in IoT manufacture environment for intelligence prediction." Soft Comput, vol. 27, pp. 1715-1729, 2023.
• [40] J. Gamec, M. Repko, M. Gamcova, I. Gladisova, P. Kurdel, A. Nekrasov, C. Fidge. "Low Profile Sinuous Slot Antenna for UWB Sensor Networks." Electronics, vol. 8, issue 2, 2019.
• [41] P. Kurdel, M. Češkovič, N. Gecejová, F. Adamčík and M. Gamcová. "Local control of unmanned air vehicles in the mountain area" Drones, vol. 54, pp. 1-18, 2022.
• [42] L. Karrach, E. Pivarčiová, P. Bozek. "Recognition of Perspective Distorted QR Codes with a Partially Damaged Finder Pattern in Real Scene Images." Applied Sciences, vol. 10, no. 21, 7814, 2020.
• [43] J. Labun, S. Fabry, M. Ceskovic, P. Kurdel. "Mechanical demodulation of aircraft antenna signal." 6th International Conference on Air Transport (INAIR), vol. 28, pp. 149-155, 2017.
• [44] Q. Arshad, W.Z. Khan, F. Azam, et al. "Blockchain-based decentralized trust management in IoT: systems, requirements and challenges." Complex Intell. Syst., 2023.
• [45] P. Sharma, R. Jindal, M.D. Borah. "A Review of Blockchain-Based Applications and Challenges." Wireless Pers Commun., vol. 123, pp. 1201-1243, 2022.
• [46] D. Dmitrishin, G. Lesaja, I. Skrinnik, A. Stokolos. "A new method for finding cycles by semilinear control." Physics Letters, Section A: General, Atomic and Solid State Physics, vol. 383, no. 16, pp. 1871-1878, 2019.

Identyfikatory

DOI

10.2478/mspe-2023-0048