Welding of Super Duplex S32750 with DOCOL 1100 for the Transport Purposes

• Autorzy: Tomasz Węgrzyn , Bożena Szczucka-Lasota , Feng Chen , Katarzyna Turoń , Adam Jurek
• Języki publikacji: EN

Abstrakty

EN

Purpose: The main novelty and the goal of the paper is to present the dissimilar SDSS with AHSS welding for automotive application. The welding automotive structure is connected with two different grades of steel with various structure (martensite with mixture of austenite and delta ferrite). Design/methodology/approach: Two dissimilar grades of steel were welded in order to get a proper joint for automotive industry. The properties of the joint was carefully tested (NDT and DT). Findings: Relations between various welding parameters and the properties of weld. Research limitations/implications: In the future, it can be suggested to investigate the effect of modified shielding gas mixtures for the MAG welding. Practical implications: The proposed process innovation will result in savings. Social implications: Modifying the shielding gas mixtures will not affect the environment and production management methods. Producing dissimilar welds translates into savings. Originality/value: It is to propose a new solution in automotive industry. The article is especially addressed to manufacturers of dissimilar material for means of transport.(original abstract)

Słowa kluczowe

EN

Automotive industry; Steel industry; Production management

PL

Przemysł motoryzacyjny; Przemysł stalowy; Zarządzanie produkcją

• Czasopismo: Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
• Rocznik: 2023
• Numer: z. 189 Współczesne zarządzanie = Contemporary management
• Strony: 683--691

Twórcy

autor

Tomasz Węgrzyn

• Politechnika Śląska

autor

Bożena Szczucka-Lasota

• Politechnika Śląska

autor

Feng Chen

• Shanghai Jiao Tong University

autor

Katarzyna Turoń

• Politechnika Śląska

autor

Adam Jurek

• Novar Sp. z o.o, Gliwice

Bibliografia

• 1. Darabi, J., Ekula, K. (2016). Development of a chip-integrated micro cooling device. Microelectronics Journal, Vol. 34, Iss. 11, pp. 1067-1074, https://doi.org/10.1016/ j.mejo.2003.09.010.
• 2. Fydrych, D., Łabanowski, J., Rogalski, G. (2013). Weldability of high strength steels in wet welding conditions. Polish Maritime Research, Vol 20, no. 2/78, 67-73. https://doi.org/10.2478/pomr-2013-0018
• 3. Golański, D., Chmielewski, T. (2018). Skowrońska B., Rochalski D., Advanced Applications of Microplasma Welding. Biuletyn Instytutu Spawalnictwa w Gliwicach, Vol. 62, Iss. 5, 53-63. http://dx.doi.org/10.17729/ebis.2018.5/5.
• 4. Hadryś, D. (2015). Impact load of welds after micro-jet cooling. Archives of Metallurgy and Materials, Vol. 60, Iss. 4, pp. 2525-2528, https://doi.org/10.1515/amm-2015-0409.
• 5. Jaewson, L., Kamran, A., Jwo, P. (2011). Modeling of failure mode of laser welds in lap- shear speciments of HSLA steel sheets. Engineering Fracture Mechanics, Vol. 1, pp 347- 396.
• 6. Krupicz, B., Tarasiuk, W., Barsukov, V.G., Sviridenok, A.I. (2020). Experimental Evaluation of the Influence of Mechanical Properties of Contacting Materials on Gas Abrasive Wear of Steels in Sandblasting Systems. Journal of Friction and Wear, Vol. 41, Iss. 1, pp. 1-5.
• 7. Shwachko, V.L. (2000). Cold cracking of structural steel weldments as reversible hydrogen embrittlement effect. International Journal of Hydrogen Energy, no. 25.
• 8. Silva, A., Szczucka-Lasota, B., Węgrzyn, T., Jurek, A. (2019). MAG welding of S700MC steel used in transport means with the operation of low arc welding method. Welding Technology Review, Vol. 91, No. 3, PL ISSN 0033-2364, 23-30.
• 9. Skowrońska, B., Szulc, J., Chmielewski, T., Golański, D. (2017). Wybrane właściwości złączy spawanych stali S700 MC wykonanych metodą hybrydową plazma + MAG. Welding Technology Review, Vol. 89(10), 104-111. http://dx.doi.org/10.26628/ ps.v89i10.825.
• 10. Szymczak, T., Makowska, K., Kowalewski, Z.L. (2020). Influence of the Welding Process on the Mechanical Characteristics and Fracture of the S700MC High Strength Steel under Various Types of Loading. Materials (Basel), Vol. 13, 22, pp. 5249-5259. doi: 10.3390/ma13225249. PMID: 33233651; PMCID: PMC7699769.

Identyfikatory

DOI

10.29119/1641-3466.2023.189.42