Cierne przenoszenie bez udziału tlenu w środowisku trących się metali

• Autorzy: Władysław Czupryk

Warianty tytułu

Frictional Transfer with No Oxygen Present in Rubbing Metals Environment

• Języki publikacji: PL

Abstrakty

Przedstawiony w artykule przeglądowy materiał umożliwi ocenę istotności różnych mechanizmów tworzenia warstewek ciernie przenoszonych w warunkach braku dostępu tlenu do strefy tarcia. (fragment tekstu)

EN

The available data on frictional transfer between rubbing metals with no oxygen present in their environment have been compiled in this paper. According to the data, the direction of the transfer in such conditions is from the material with lower cohesion energy E_k (lower strength) to the material with higher cohesion energy. Numerous tests have shown that wear particles originate from the frictionally transferred layer, whereas the particles separated from the counter-piece are not wear particles. The steel wear particles are transferred to the counter-piece. There is general agreement that adhesion, abrasion and fatigue play an important role in the frictional transfer of elements between the sliding-pair materials in conditions of no oxygen admission. (original abstract)

Słowa kluczowe

PL

Chemia; Pierwiastki chemiczne

EN

Chemistry; Chemical elements

• Czasopismo: Prace Naukowe Akademii Ekonomicznej we Wrocławiu. Technologia
• Rocznik: 2002
• Tom: 9
• Numer: nr 949
• Strony: 46--51

Twórcy

autor

Władysław Czupryk

• Akademia Ekonomiczna we Wrocławiu

Bibliografia

• Bill R.C., Wisander D.: Recrystalization as a Controlling Process in the Wear of Some F.C.C. Metals. "Wear" 1977 nr 41, s. 351-363.
• Chen L.H., Rigney D.A.: Transfer during Unlubrioated Sliding Wear of Selected Metal Systems. "Wear" 1985 nr 105, s. 47-61.
• Don J., Sun T.C., Rigney D.A.: Friction and Wear of CuBe and Dispersion-hardened Copper Systems. "Wear" 1983 nr 91.
• Godet M.: Third-bodies in Tribology. "Wear" 1990 nr 136, s. 29-45.
• Hatherly M., Malin A.S.: Shear Bands in Deformed Metals. "Scripta Metallurgica" 1984 nr 18, s. 449-454.
• Heilmann P., Don J., Sun T.C., Rigney D.A.: Sliding Wear and Transfer. "Wear" 1983 nr 91, s. 171-190.
• Kerridge M.: Metal Transfer and Wear Process. "Proc. Phys. Soc. London" 1955, Sect. B, nr 68, s. 400-407.
• Kerridge M., Lancaster J.K.: The Stages in a Process of Severe Metallic Wear. "Proc. R. Soc. London" 1956, ser. A, nr 236, s. 250-264.
• Kragielskij I.V., Dobyćin M.N., Kombolov V.S.: Osnovy rascetov na trenie i iznos. "Maśinostroenie". Moskva 1977.
• Mitchel D.C., Pratt G.G.: Proceedings, Lubrication and Wear Conference. London 1958, s. 416-423.
• Reid J.V., Schey J.A.: Adhesion of Copper Alloys. "Wear" 1985 nr 104, s. 1-20.
• Rigney D.A., Chen L.H., Naylor M.G.S.: Wear Process in Sliding Systems. "Wear" 1984 nr 100, s. 195-219.
• Robert C., Wisander D., Wisander B.: Recrystallization as a Controlling Process in the Wear of Some F.C.C. Metals. "Wear" 1977 nr 41, s. 351-363.
• Sakamoto T., Tsukizoe T.: Metal Transfer in the Frictional Contact of a Rough Hard Surface. "Wear" 1978 nr 47, s. 301-313.
• Schell J., Heilman P., Rigney D.A.: Friction and Wear of Cu-Ni Alloys. "Wear" 1982 nr 75, s. 205-220.
• Taga Y., Isogai A., Nakajima K.: The Role of Alloying Elements in the Friction and Wear of Copper Alloys. "Wear" 1977 nr 44, s. 377-391.
• Van Dijek I.A.B.: The Direct Observation in the Transmission Elektron Microscope of the Heavily Deformed Surface Layer of a Copper Pin after Dry Sliding Against a Steel Ring. "Wear" 1977 nr 42, s. 109-117.
• Zwierzycki W. (i in.): Wybrane zagadnienia zużywania się materiałów ślizgowych w węzłach maszyn. Warszawa-Poznań: Wyd. Naukowe PWN 1990.