Badania wstępne obróbki elektroerozyjnej w gazie z zastosowaniem dodatkowego chłodzenia przedmiotu obrabianego

• Autorzy: Agnieszka Żyra , Sebastian Skoczypiec

Warianty tytułu

Preliminary Tests of Electrodischarge Machining in Gaseous Dielectric with Additional Workpiece Cooling

• Języki publikacji: PL

Abstrakty

EN

Electrodischarge machining (EDM) in the gas can be an alternative to traditional electrodischarge machining in dielectric liquids. Dry EDM has many advantages comparing with traditional EDM, what is more with optimal machining parameters it is possible to gain very good accuracy and quality of machined surface. Moreover, EDM in the gas is environmental friendly, even that it is still not used in industry because of the problems with proper heat dissipation from the machining gap which results in problems with achieving satisfying repetitiveness. In the paper the results of austenitic steel X5CrNi 1810 electrodischarge drilling in the air and in the air in deionised water environment were presented. The aim of the research was to determinate the influence of current intensity, current voltage, pulse on time, pulse off time and a type of electrodes' polarization on the material removal rate, working electrode wear and the machined material surface structure. (original abstract)

Słowa kluczowe

PL

Komputerowe wspomaganie zarządzania; Produkcja

EN

Computer aiding management; Production

• Czasopismo: Zarządzanie Przedsiębiorstwem / Polskie Towarzystwo Zarządzania Produkcją
• Rocznik: 2019
• Tom: 22
• Numer: nr 1
• Strony: 25--32

Twórcy

autor

Agnieszka Żyra

• Politechnika Krakowska

autor

Sebastian Skoczypiec

• Cracow University of Technology

Bibliografia

• Banu A., Ali Mohammad Yeakub, Electrical Discharge Machining (EDM): A Review, International Journal of Engineering Materials and Manufacture, 1, 3-10, 2016.
• El-Hofy H., Advanced machining processes, McGrawHill, 2005.
• Fattahi S., Baseri H., Analysis of dry electrical discharge machining in different dielectric mediums, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering IMECHE, 231, 3, 497-512, 2015.
• Govindan P., Joshi S., Experimental characterization of material removal in dry electrical discharge drilling, International Journal of Machine Tools and Manufacture, Elsevier, 50, 5, 431-443, 2010.
• Hourmand M., Sarhan A., Sayuti M., Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review, The International Journal of Advanced Manufacturing Technology, pp. 1-34, 2016.
• Jha B., Ram K., Rao M., An overview of technology and research in electrode design and manufacturing in sinking electrical discharge machining, Journal of Engineering Science and Technology Review, 4, 2, 118-130, 2011.
• Klink A., Process signatures of EDM and ECM Processes - overview from part functionality and surface modification point of view, Procedia CIRP, 42, 240- 245, 2016.
• Kunieda M., Furudate C., High precision finish cutting by dry WEDM, CIRP Annals - Manufacturing Technology, 50, 1, 121-124, 2001.
• Kunieda M., Yoshida M., Taniguchi N., Electrical Discharge Machining in Gas, CIRP Annals - Manufacturing Technology, 46, 1, 143-146, 1997.
• Kunleda M. et al., High Speed 3D Milling by Dry EDM, CIRP Annals - Manufacturing Technology, 52, 1, 147- 150, 2003.
• Macedo F.T.B., Wiessner M., Hollenstein C., Kuster F., Wegener K., Investigation of the Fundamentals of Tool Electrode Wear in Dry EDM, Procedia CIRP, Elsevier B.V., 46, Hpc Vii, 55-58, 2016.
• Macedo F.T.B., Wiessner M., Hollenstein C., Kuster F., Wegener K., Dependence of Crater Formation in Dry EDM on Electrical Breakdown Mechanism, Procedia CIRP, 42, 161-166, 2016.
• Miernikiewicz A., Doświadczalno-teoretyczne podstawy obróbki elektroerozyjnej (EDM), Kraków, Politechnika Krakowska, 2000.
• Puthumana G., Joshi S., Investigations into performance of dry EDM using slotted electrodes, International Journal of Precision Engineering and Manufacturing, 12, 6, 957-963, 2011.
• Rajurkar K.P., Sundaram M.M., Malshe A.P., Review of Electrochemical and Electrodischarge Machining, Procedia CIRP, Elsevier B.V., 6, 13-26, 2013.
• Roth R. Kuster F., Wegener K., Influence of oxidizing gas on the stability of dry electrical discharge machining process, Procedia CIRP, Elsevier B.V., 6, 338-343, 2013.
• Saha K., Choudhury S.K., Experimental investigation and empirical modeling of the dry electric discharge machining process, International Journal of Machine Tools and Manufacture, 49, 3-4, 297-308, 2009.
• Skrabalak G., Kozak J., Zybura M., Optimization of dry EDM milling process, Procedia CIRP, Elsevier B.V., 6, 332-337, 2013.
• Uhlmann E. et al., Comparative Analysis of Dry-EDM and Conventional EDM for the Manufacturing of Micro Holes in Si3N4-tin, Procedia CIRP, 42, 173-178, 2016.
• Yang D. et al., Technology of ablation milling by fastmoving electrode, The International Journal of Advanced Manufacturing Technology, 2018.
• Żyra A., Bizoń W., Skoczypiec S., Primary Research On Dry Electrodischarge Machining With Additional Workpiece Cooling, AIP Conference Proceedings, 2017, 020034, 2018.

Identyfikatory

DOI

10.25961/ent.manag.22.01.04