Analysis of Roll Wear Costs During Multi-Strand Rolling of Ribbed Bars Using New Slitting Pass System

• Autorzy: Dominika Strycharska
• Języki publikacji: EN

Abstrakty

EN

The paper presents a modification of the slitting pass system, which ensured a reduction in roll wear during three-strand rolling of ribbed bars with a diameter of 16 mm, and thus reduced the associated costs. The theoretical and experimental research on the rolling process of ribbed bars with a diameter of 16 mm rolled in three-strand technology was carried out on a D350 18-stand continuous bar rolling mill conditions. To determine the cost of slitting pass wear, the results of numerical calculations of the frictional force unit of work obtained using the Forge2011® computer program was used, as well as empirical calculations. (original abstract)

Słowa kluczowe

EN

Machinery and equipment; Mechanics

PL

Maszyny i urządzenia; Mechanika

• Czasopismo: New Trends in Production Engineering
• Rocznik: 2019
• Tom: 2(2) Selected Aspects of Production Engineering in Management and Materials Engineering
• Strony: 267--278

Twórcy

autor

Dominika Strycharska

• Czestochowa University of Technology, Poland

Bibliografia

• Byon, S. M., Kim, S. I. and Lee Y. (2017). A semi analytical model for predicting the wear contour in rod rolling process. Journal of Materials Processing Technology, 191, pp. 306-309.
• Byon, S.M., Na, D. H. and Lee, Y. (2009). Effect of roll gap adjustment on exit cross sectional shape in groove rolling-Experimental and FE analysis, Journal of Materials Processing Technology, 209 (9), pp. 4465-4470.
• Dyja, H., Mróz, S. and Turczyn, St. (2010). The process of ribbed bar rolling with longitudinal band separation. In: Conference MEFORM, 80 Jahre Walzwerks - und Werkstoff technologie, Freiberg, pp. 317-327.
• Gabrusewicz, W., Kamela-Sowińska A., Poetschke H., Rachunkowość zarządcza, Warszawa, 2000 (PWE).
• Karpiński, T. (2004) Inżynieria Produkcji. Warszawa: Wydawnictwo Naukowo - Techniczne.
• Lambiase, F. (2014) Prediction of geometrical profile in slit rolling pass, The International Journal of Advanced Manufacturing Technology, 71, pp. 1285-1293.
• Madej, Ł., Węglarczyk, S. and Pietrzyk, M. (2009). Analiza wpływu parametrów cyklu produkcyjnego elementów złącznych na zużycie narzędzi, Hutnik - Wiadomości Hutnicze, 8: pp. 620-622.
• Mróz, S. (2008). Proces walcowania prętów z wzdłużnym rozdzielaniem pasma. Seria Monografie 138. Częstochowa: Wydawnictwo Politechniki Częstochowskiej.
• Mróz, S. (2009). Modification of the roll pass design to the bar rolling process with longitudinal band separation. Archives of Metallurgy and Materials, 54, pp. 597- 605.
• Mróz, S. (2010). New Roll Pass Design to the Bar Rolling Process Using Longitudinal Slitting Passes. Solid State Phenomena, 165, pp. 310-315.
• Na, D. H., Cho, S. H. and Lee Y. (2011). Experimental and numerical studies for the forming groove and separating groove design in slit rolling process. Journal of Mechanical Science and Technology, 25 (9), pp. 2439-2446.
• Nowak, E. (2000). Rachunek kosztów. Wrocław: Ekspert.
• Repetowski, R. (2010). Konkurencyjność przedsiębiorstwa w dobie globalnego kryzysu finansowego. Przedsiębiorczość - Edukacja, 6, pp. 92-100.
• Stefanik, A. (2008). Slitting criterion for various rolling speeds in MSR rolling process. Journal of Achievements in Materials and Manufacturing Engineering, 27 (1), pp. 91-94.
• Strycharska, D. (2015) The technical and economic aspects of multi-strand ribbed bar rolling using the new system of passes, Ph.D., Czestochowa University of Technology.
• Strycharska, D., Szota, P. and Mróz, S. (2017) Increasing the durability of separating rolls during rolling ribbed bars in the three-strand technology. Archives Metallurgy and Materials. 62(3), pp. 1535-1540.
• Szota, P., Mróz, S., Stefanik, A. and Dyja, H. (2011). Numerical modelling of the working rolls wear during rods rolling process. Archives of Metallurgy and Materials, 56 (2),pp. 495-501.
• Szota, P., Strycharska, D., Mróz S. and Stefanik A. (2015). Analysis of rolls wear during the ribbed bars multi-slit rolling process. Archives of Metallurgy and Materials, 60 (2), pp. 815-820.
• Turczyn, S. and Michałowski, M. (1999) Walcowanie prętów okrągłych z wielokrotnym podziałem wzdłużnym pasma "multi slit rolling". Hutnik - Wiadomości Hutnicze, 1, pp. 8-12.
• Turczyn, S., Dziedzic, M. and Kuźmiński, Z. (2014). A study on design of slitting passes used for rebar rolling, In: Conference METAL 2014, Brno, pp. 303-308.

Identyfikatory

DOI

10.2478/ntpe-2019-0091