Partial Cases of Stressed-Deformed Condition of Casing and Pump Compressor Pipes

• Autorzy: Vitalii Vasylyshyn , Iryna Taras , Iryna Bekish , Olena Kornuta , Volodymyr Kornuta
• Języki publikacji: EN

Abstrakty

EN

Threaded joints are the most technological for piling up in the fields. However, violations of standard threaded joints account for 70% of all complications in pipe processing and production. These malfunctions result in significant material losses, reduced well productivity, and contamination of the wells and environmental pollution. Particularly acute is the loss of these sealed joints during exploration and development of gas and gas condensate fields. The necessary increase in volumes and intensification of hydrocarbon energy production is envisaged by the increase of drilling depth, construction of slopes and horizontal wells. Horizontal drilling and fracturing are used to produce shale gas. The efficiency and safety of the operation of oil and gas wells in complex mining and technical conditions depend on the quality and reliability of casing and pumping columns, which requires the modernization of machinery and technology for the installation of wells. The most technological for column fitting in the fisheries sector is threaded joints. However, breach of standard threaded connections causes 70% of all complications with pump housings and columns. This leads to significant material losses, reduced production of raw materials, contamination of the interior and the environment. Therefore, the urgent task is to improve the threaded joints by increasing their reliability and efficiency under heavy workloads. (original abstract)

Słowa kluczowe

EN

Exploitation; Oil; Shale gas; Machinery and equipment; Materials engineering; Materials science

PL

Eksploatacja; Ropa naftowa; Gaz łupkowy; Maszyny i urządzenia; Inżynieria materiałowa; Materiałoznawstwo

• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2020
• Tom: 28
• Numer: nr 2
• Strony: 97--103

Twórcy

autor

Vitalii Vasylyshyn

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Iryna Taras

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Iryna Bekish

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Olena Kornuta

• Ivano-Frankivsk National Technical University of Oil and Gas

autor

Volodymyr Kornuta

• Ivano-Frankivsk National Technical University of Oil and Gas

Bibliografia

• A.P. Farr. "Torque requiments for rotary-shouldered connections and selection of Connetions for drill collars". The American Society of Mechanical Engineers, vol. 57, 1957, 305p.
• I.D, Faux, M.J. Pratt. Computational Geometry for Design and Manufacture. Chichester, West Sussex, John Willey & sons, 1979.
• I.D. Faux, M.J. Pratt. Computational Geometry for Design and Manufacture (Mathematics and Its Applications) Ellis Horwood; New Ededition, 1981.
• A. Fox. Computational geometry. Application in design and production. Moskwa, 1982.
• V. Hauk., H. Hillemann, H. Kochler. "Schwingende Langskraft und Drehmoment beanspruchung von Bohrgestanden". Erdol und Kohle - Erdgas - Petrochemie, vol. 7, 1965, pp. 514-552.
• E. Kryzhanovsky, V. Ivasiv, V. Vasylyshyn, R. Rachkevich. "Fatigue life of threaded pipe connections in curved sections of wells". Scientific Bulletin National Mining University, vol. 5, 2015, pp. 14-21.
• O. Onysko, L. Shkitsa, I. Taras. "Geometric analysis of manufacturability of conical locking thread" in Proc. Progressive Technologies in Engineering RTME-2019, 2019, pp. 216-218.
• O. Onysko, V. Panchuk, V. Vryukalo. "Threaded cutters with straight-cut cutting edge adjusted by value of front angle" in Proc. Progressive Technologies and Systems of Mechanical Engineering, 2014, pp. 10-14.
• O. Onysko, L. Boruschak, V. Kopey. "Ensuring the precision of manufacturing casing thread by applying parametric design of the profile of the cutting section of threaded tools in the environment of the Delphi programming system". Scientific Bulletin of the National Technical University of Oil and Gas, vol. 2 (20), 2009, pp. 50-53.
• O. Onysko. "Methods of ensuring the accuracy of production of threaded ends of pipes of oil and gas assortment". Exploration and Development of Oil and Gas Fields, vol. 3 (52), 2014, pp. 107-115.
• R. Rachkevich. "Stress-deformed state of the compressed drill string in the horizontal wellbore". Exploration and Development of Oil and Gas Fields, vol. 3 (44), 2012, pp. 70-77.
• S. Savula, V. Kolodiy, E. Kharchenko. "Estimation of the influence of oscillations of the tubing column on the conditions of operation of the joints". Scientific Bulletin of the National Technical University of Oil and Gas, vol. № 2 (8), 2004, pp. 116-125.
• L. Trischmon. "Methods for the Improvement of Drillcoller Jihst Eveluated bu Full size Fatigues tests". Drilling and Production Practice, vol. 5, 1972, p. 175.
• V. Vasylyshyn. "The effect of screwing torque on the fatigue resistance of locking threaded connections of drill pipes". Exploration and Development of Oil and Gas Fields, vol. №4 (37), 2010, pp. 55-58.
• V. Vasylyshyn. "Analysis of force factors in the elements of the threaded connection under counter-load method". Exploration and Development of Oil and Gas Fields, vol. №2 (27), 2008, pp. 62-66
• V. Vasylyshyn. "Graphoanalytic modeling of surfaces of threaded unloading grooves of threaded joints of pipes of oil assortment". Oil and gas industry, vol. 36, 1999, pp. 167-173.
• V. Vasylyshyn. "Analysis of force factors in the elements of a threaded connection under one-way loading method". Exploration and Development of Oil and Gas Fields, vol. №1 (34), 2010, pp. 106-108.
• V. Vasylyshyn, I. Paliychuk, P. Shcheglyuk, S. Roketsky. "Analysis of problems and ways to increase the reliability and tightness of clutch joints casing". Exploration and Development of Oil and Gas Fields, vol. №1 (42), 2012, pp. 169-176.
• V. Vasylyshyn. "An algorithm for calculating the areas of annular sections of surfaces of threaded unloading grooves". Scientific Bulletin of the National Technical University of Oil and Gas, vol. №2 (24), 2010 pp. 77-80.
• V. Vasylyshyn. "Analysis of the Impact of the Threaded Unloading Groove on the Fatigue Resistance of Castle Thread Joints" in Proc. Innovative Potential of Ukrainian Science - XXI Century, 2010, pp. 67-70.
• V. Vasylyshyn. "Analysis of the Impact of Screwing Torque on the Fatigue Resistance of Threaded Joints of Oil and Gas Equipment" in Proc. Research Development 2010, 2010, pp. 16-20.
• V. Vasylyshyn. "Theoretical substantiation of the surface shapes of threaded unloading grooves of threaded pipe joints" in Proc. Oil and Gas of Ukraine 2000, 2000, pp. 297-299.
• V. Vasylyshyn. "Ways to improve the reliability and tightness of clutch joints of casing" in Proc. Space and Time of Modern Science, 2013, pp. 37-39.
• H. Wiegand. "Die Dauerhaltbarkcit von Gewindever bindungen mit ISO". Profil in Abhangigkeit von der Einschraubtiefe, vol. 16, 1964, pp. 3-16.

Identyfikatory

DOI

10.2478/mspe-2020-0015